Overview
The Flex-A-Lite 104641 is a dual 15-inch electric fan system, part number FLX104641. It is a direct-fit, bolt-on replacement for the stock clutch fan on 2003-2009 Dodge Ram trucks with the 5.9L or 6.7L Cummins diesel.
The kit uses two 15-inch S-Blade electric fans and an adjustable temperature controller. It can recover up to 27 horsepower, improve fuel economy by up to 6 percent and move up to 5,500 cfm of airflow.
Key features
- Two 15-inch S-Blade electric fans
- Adjustable temperature controller
- Direct-fit, bolt-on design
- Up to 5,500 cfm of airflow, per the brand
- Up to 27 horsepower recovered, per the brand
Choosing and wiring electric fans
An electric fan moves air across the radiator on demand instead of depending on engine speed the way a clutch fan does. That means it can run harder when the engine works hard and idle more when conditions are cool. The main benefit is steadier cooling and less parasitic drag, which is why electric setups are common on trucks used for towing and slow crawling.
Fan size, blade design and the controller setting all affect how the system performs. Make sure the fan shroud and radiator clearance are right before installing, since a fan that is too close can rub or pull debris into the core. Wiring should use a properly sized relay and fused feed so the fans draw power safely. Keep the temperature controller in a dry location.
Plan for the replacement of the old clutch fan and its mounting hardware, and check the water pump pulley for wear while the fan is off. Electric fans have fewer moving parts to inspect, but the wiring, connectors and fan blades still need checks after rough trips.
- Confirm shroud and radiator clearance before mounting
- Use a relay and fused feed for the fans
- Keep the controller in a dry location
Specifications
| Brand | Flex-A-Lite |
|---|---|
| Part number | FLX104641 |
| Fan size | 15 inch |
| Fan style | Double |
| Blade style | S-Blade |
| Airflow | Up to 5,500 cfm |
| Horsepower recovered | Up to 27 |
| Fuel economy improvement | Up to 6 percent |
| Temperature control | Adjustable temperature controller |
Vehicle fitment
It fits 2003-2009 Dodge Ram trucks with the 5.9L or 6.7L Cummins diesel. Check your truck’s year, model and trim against that application before ordering.
Other Ram trucks outside 2003-2009, and trucks with engines other than the 5.9L or 6.7L Cummins diesel, are not covered by this kit. Match your truck’s year, model and trim before ordering.
Installation notes
The fans replace the stock clutch fan assembly, so remove the old clutch fan first. Disconnect the battery before wiring the fans and temperature controller.
What’s included
Two 15-inch S-Blade electric fans and an adjustable temperature controller.









