Overview
The Flex-A-Lite 111 is a 12 inch electric single puller fan in black, rated at 1250 CFM, with a mounting surface of 15 x 13.5 x 2.5/8 inch. As a puller, it draws air through the radiator and is made in the USA.
The 110F and 210F fans come with rigid brackets and through-the-core installation kits. The 111 is the single puller in that family, with an adjustable thermostat set from 160 to 240 degree and a built-in A/C relay.
Key features
- 12 inch single electric puller fan
- Rigid brackets and through-the-core installation kits for the 110F and 210F fans
- Adjustable thermostat from 160 to 240 degree
- Built-in A/C relay
- Made in the USA
Mounting and clearance
A puller fan sits behind the radiator and pulls air through the core, so its position relative to the radiator and the engine matters for both airflow and clearance. The fan body, the shroud and the brackets all take up space, and the fan must not touch the belts, pulleys or the hood when the engine is raised on its mounts. Mock up the fan with the radiator in place before drilling anything.
Thermostat-controlled electric fans cut load on the engine, but the control is only as good as its wiring. Use a fused feed, keep the wires away from hot exhaust and moving parts, and check that the relay connections are tight and dry. After the first few heat cycles, confirm the fan switches on at the set point and turns off when the engine cools.
Specifications
| Brand | Flex-A-Lite |
|---|---|
| Model | 111 |
| UPC | 88657001113 |
| Fan size | 12 inch |
| Fan style | Single electric puller |
| Airflow | 1250 CFM |
| Mounting surface | 15 x 13.5 x 2.5/8 inch |
| Thermostat range | 160 to 240 degree |
| Color | Black only |
| Fitment | Direct fit |
| Origin | Made in the USA |
Vehicle fitment
No vehicle is named for this fan. It is direct fit, so the match depends on the mounting surface and radiator clearance rather than a model name.
Check the mounting surface against your radiator opening before choosing this fan, since the 2.5/8 inch dimension is given as written. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use the rigid brackets and through-the-core kit made for this fan family, and set the thermostat within the 160 to 240 degree range. Wire the built-in relay on a fused circuit rated for the fan’s draw.
What’s included
One 12 inch electric single puller fan, part number 111.
Not included: Check what arrives in the box, including whether the rigid brackets and installation kit are included, before installation.












