Overview
The Firestone Ride-Rite Air Helper Spring Kit, model 2595, is a rear air helper spring kit that adds load leveling support to the rear of a vehicle. It includes air helper springs, supports, hardware, an air line and inflation valves, and it installs without drilling.
Firestone air spring systems are designed to support safe load carrying capacity, stability and ride quality. The springs are designed and assembled in the USA, and the technology is also used on heavy duty trucks, trailers and buses.
Key features
- Rear application
- Air helper springs with supports, hardware, air line and inflation valves
- No drilling required
- Designed and assembled in the USA
- Firestone technology also used on heavy duty trucks, trailers and buses
Air line and valve upkeep
The air line and inflation valves are the parts most often overlooked after installation, yet they control every pressure change the springs make. Route the line away from heat, sharp edges and moving parts, and secure it with the clips or hardware that come with the kit. Chafing against the frame or a bracket can wear through the line over time, so look at the full run after each service.
Valve caps keep dirt out of the threads and help prevent slow leaks. Check each valve for air loss after installation, and again after the first few loaded trips. If a valve does not hold pressure, tighten the fitting first and then replace the valve if it still leaks. Using a separate compressor and gauge for every adjustment keeps the readings consistent.
- Route the line away from heat and edges
- Secure with the included clips
- Check valves for air loss
- Replace worn or cracked fittings
Specifications
| Brand | Firestone Ride-Rite |
|---|---|
| Model number | 2595 |
| OEM number | W217602595 |
| UPC | 767555160435 |
| Application | Rear |
| Included | Air helper springs, supports, hardware, air line, inflation valves |
| Installation | No drilling required |
| Assembly | Designed and assembled in the USA |
Vehicle fitment
No vehicle years, makes or models are identified for this kit. Match your vehicle’s year, model and trim against the fitment before ordering, using OEM number W217602595 as a reference.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
No drilling is needed, and the supports, hardware, air line and inflation valves come with the kit.
What’s included
Air helper springs, supports, hardware, an air line and inflation valves.
Not included: no air compressor or gauges are listed.









