Overview
The Fabtech FABFTS6358 is a rear Stealth Series shock for a 6 inch lift on 2020 and 2021 Chevrolet Silverado 2500 HD and 3500 HD and GMC Sierra 2500 HD and 3500 HD. It covers High Country, LT, LTZ and WT Silverado models, and Base, Denali, SLE and SLT Sierra models.
The shock has a 50 mm seamless steel body, a 46 mm high flow piston and a 14 mm Nitrocarb piston rod. The Nitrocarb rod is designed to resist rock chips and rust. A full floating piston separates the gas from the oil for a steady ride.
It is sold as part of the 6 inch lift kits K1161M and K1159M and is also sold individually. Its valving is designed for oversized tires.
Key features
- Rear position
- Part of 6 inch lift kits K1161M and K1159M
- 50 mm seamless steel body
- 46 mm high flow piston
- Full floating piston separating gas from oil
- 14 mm Nitrocarb piston rod
- All black finish with a raised nameplate
Setting up a 6 inch lift
A lift changes the angle of the driveline, the length of brake lines and the travel each shock must handle. Once the truck is raised, the shocks sit at different lengths than they did at stock height, so the mounts and bump stops need checking to avoid binding at full droop or full compression. Lift kit instructions should be followed in order.
Lifted heavy-duty trucks also benefit from an alignment after the suspension settles, since new geometry can change toe and caster. Because the rear shock is only one part of the setup, check the steering components and driveline angles at the same visit.
- Driveline angles after the lift
- Brake line length and clearance
- Bump stop clearance
- Alignment after installation
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FABFTS6358 |
| Series | Stealth Series |
| Position | Rear |
| Shock type | Monotube |
| Top mount | Eyelet |
| Bottom mount | Eyelet |
| Body | 50 mm seamless steel |
| Piston | 46 mm high flow, full floating |
| Piston rod | 14 mm Nitrocarb |
| Finish | All black with raised nameplate |
| Charge | Gas charged |
| Lift kits | K1161M and K1159M |
| Quantity | Sold individually |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2020 and 2021 Chevrolet Silverado 2500 HD and 3500 HD in High Country, LT, LTZ and WT models, and the GMC Sierra 2500 HD and 3500 HD in Base, Denali, SLE and SLT models.
The list covers 2020 and 2021 HD trucks only, so 1500 models and other years are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock is tied to Fabtech’s 6 inch lift kits, so confirm which kit your truck uses and match the lift before fitting. Lifts of this size change driveline angles, so check them after installation.
What’s included
One rear shock, sold individually.









