Overview
The Fabtech Stealth Monotube Shock Absorber, part number FTS6299, is a rear-position gas charged monotube shock designed for a 6 in. lift.
Vehicle specific valving and a 46mm high flow piston form the core of the design. A free floating piston keeps the nitrogen gas charge separate from the oil, which helps limit shock fade in off-road conditions.
Key features
- Rear-position monotube design
- 46mm high flow piston
- Free floating piston keeping nitrogen from mixing with the oil
- Listed lift height of 6 in.
Rear lift considerations
The rear shock carries a large share of the load on a lifted truck, and it works with the leaf springs or coil springs and the axle location to control rebound and compression. When a lift changes the rear geometry, the shock angle and length may change as well, which can affect how it moves through its stroke. A gas charged monotube body is a common choice for rear use because its floating piston helps keep damping steady during long descents.
Before replacing a rear shock, check the bushings at both ends and look for any binding that could show up as a stiff or uneven ride. Lifted rigs often run larger tires, so confirm there is clearance at full compression as well as full extension.
- Check both eyes for play or cracking
- Confirm clearance at full rebound and full compression
- Look for leaks on the body after rough trail use
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS6299 |
| UPC | 674866090361 |
| Product line | Stealth Monotube |
| Position | Rear |
| Shock type | Gas charged monotube |
| Piston diameter | 46mm |
| Gas charge | Nitrogen |
| Lift height | w/6 in. |
Vehicle fitment
Verify the rear application for your year, model and trim before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rear shock installation on a lifted vehicle depends on the lift method in use, so confirm the mounting setup for your rear suspension before fitting.
What’s included
Check the mounting hardware and any spring parts against your installation before starting.








