Overview
The Fabtech Dirt Logic 2.25 shock absorber, part number FTS811402, is a front shock for the 2018 Jeep Wrangler JL Unlimited with a 3 in. lift. It is a 2.25 replacement for factory shocks with a larger, more robust configuration than the original.
The 2.25 size is what sets this shock apart from other replacement take-apart designs, and it is pretuned for each Fabtech suspension to account for larger tires. It is used with kit part numbers K4107DL, K4101DL and K4117DL.
Key features
- 2.0 inch OD billet aluminum piston
- 7/8 inch NitroSteel black piston rod
- Polyurethane mounting ends
- Billet aluminum top cap and rod end
- Urethane bushings that reduce noise and rattle
- Pretuned for each Fabtech suspension
Front travel and steering clearance
A front shock works between the axle and frame and helps control steering stability as well as ride. On a Wrangler JL, the front shock must clear the axle, steering linkage and brake lines through full compression and full rebound. The travel of the unit determines how close those components come to each other when the suspension cycles.
Pretuned shocks are designed to account for larger tires, but tire size and wheel offset still change how the front suspension loads. After installation, cycle the suspension by hand and watch the steering linkage and the front axle for contact. Check the mounting bolts after the first few drives, and recheck them after any off-road trip with heavy compression.
- Check clearance at full compression
- Watch for steering linkage contact
- Inspect polyurethane mounting ends
- Recheck bolts after initial drives
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS811402 |
| UPC | 674866106338 |
| Position | Front |
| Fitment type | Direct Fit |
| Lift height | 3 in. lift |
| Body | Stainless steel |
| Piston | 2.0 inch OD billet aluminum |
| Piston rod | 7/8 inch NitroSteel black |
| Mounting ends | Polyurethane |
| Top cap and rod end | Billet aluminum |
| Bushings | Urethane |
| Kit part numbers | K4107DL, K4101DL and K4117DL |
Vehicle fitment
It fits the 2018 Jeep Wrangler JL Unlimited in Rubicon, Sahara, Sport and Sport S trims.
The list shows four-door Unlimited trims only, so two-door JL models are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is a direct replacement for factory shocks, so remove the original front shock and fit this unit in its place. After installing, check clearance to the front axle and steering linkage at full travel.
What’s included
Only one front shock is described, with no mounting hardware itemized.








