Overview
Part FTS22253 is a Dirt Logic 2.5 resi coil over shock absorber from Fabtech, built for the front of 2015–2017 Ford F-150 trucks with a 2 in. lift.
The springs can be run solid with no breaking, settling or bowing. The shock is delivered preset and bolts on as a direct-fit part.
Key features
- Front-position resi coil over design
- Designed for a 2 in. lift
- Springs are built to tolerate running solid.
- Arrives preset with proper preload
- Made for use with PN K2246DL
Resi shocks and kit matching
Kit part numbers identify the parts a shock was built to work with, so a mismatched component can change ride height and suspension travel. Keeping the kit’s parts list on file makes it easier to confirm the setup before installing and during later service.
A resi design keeps damping oil in a separate reservoir, which supports steady damping over longer use. Route the reservoir hose so it clears the frame and tires through full travel, and look for chafing or a loose clamp at each inspection. After any change in height, have the front alignment checked.
- Confirm the kit part number before installing
- Route the reservoir hose clear of moving parts
- Check the clamp and hose for wear
- Have front alignment checked after height changes
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS22253 |
| UPC | 674866104648 |
| Position | Front |
| Lift height | 2 in. |
| Shock type | Resi coil over |
| Compatible kit part number | K2246DL |
| Fitment type | Direct fit |
Vehicle fitment
The 2015–2017 Ford F-150 is the application Fabtech lists, in King Ranch, Limited, Lariat, Platinum, SSV, XL and XLT trims.
Super Duty models and years outside 2015–2017 are not part of this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock is tied to PN K2246DL, so confirm the kit match before you install. Any change in ride height calls for a front alignment check.
What’s included
One resi coil over shock absorber with its coil springs. Check any mounting hardware against your installation before starting.









