Overview
The Fabtech FTS7338 is a front performance twin tube shock absorber designed for a w/6 in. lift. It fits 2011–2017 Chevrolet Silverado 2500 HD and 3500 HD and GMC Sierra 2500 HD and 3500 HD trucks, in the trims named in the fitment section.
It is a hydraulic twin tube design with a 2.38 inch diameter body, 12.4 in. of travel and a 9/16 inch chrome hardened piston rod. The 1 3/8 inch OD piston works with high flow 9 stage valving and a closed cell foam insert, which Fabtech says reduce shock fade at high speeds.
Key features
- Front position performance shock
- Designed for a w/6 in. lift
- Lower mount EB1 and upper mount ES34
- High flow 9 stage valving
- Closed cell foam insert
- Hydraulic design with no reservoir
Heavy-duty front shocks under load
Heavy-duty pickups carry more weight at the front axle when towing or hauling, and that load puts extra work on the damper. A shock with a hydraulic twin tube body handles repeated compression without losing control as quickly, which helps keep the truck steady on rough roads. Signs of wear include fluid on the body, knocking over bumps and uneven tire wear across the front.
When a lift raises the truck, the shock works at a different angle and travel. Match the suspension height to the setup you run, and check that brake lines and steering components have room through full travel. Replacing the upper and lower mounts at the same time keeps the geometry consistent.
- Check the mounts for cracked or collapsed bushings
- Recheck clearance after changing tire size
- Look for leaks around the shaft seal at each service
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7338 |
| UPC | 674866029132 |
| Shock series | Performance Shock |
| Position | Front |
| Fitment type | Direct fit |
| Lift height | w/6 in. lift |
| Collapsed length | 29.98 in. |
| Extended length | 17.58 in. |
| Travel length | 12.4 in. |
| Lower mount | EB1 |
| Upper mount | ES34 |
| Reservoir | No |
| Shock body | 2.38 inch diameter twin tube hydraulic |
| Piston rod | 9/16 inch chrome hardened |
| Piston | 1 3/8 inch OD |
| Valving | High flow 9 stage |
| Insert | Closed cell foam |
| Finish | White powdercoat with blue Fabtech logo |
| Hydraulic / gas charged | Hydraulic |
Vehicle fitment
It fits the 2011–2017 Chevrolet Silverado 2500 HD (High Country, LT, LTZ, WT) and 3500 HD (High Country, LT, LTZ, WT), and the 2011–2017 GMC Sierra 2500 HD (Base, Denali, SLE, SLT, WT) and 3500 HD (Base, Denali, SLE, SLT, WT).
Light-duty pickups and model years outside 2011–2017 fall outside this fit. Confirm fit for your truck’s year, model and trim before buying.
Installation notes
The stated lift is w/6 in., so match your suspension height to that figure. Compare the EB1 lower and ES34 upper mounts with your existing shock before starting the swap.
What’s included
Included hardware is unknown for the FTS7338. Check the package contents against your installation before starting.








