Overview
The Fabtech FTS7172 is a front Performance twin tube shock absorber for Jeep Wrangler LJ Unlimited models from 2004–2006 and the 1997–2006 Wrangler TJ, with a 4 in. lift listed.
This shock has a 2.38 inch diameter body, a 10.16 in. travel length, a 24.78 in. collapsed length and a 14.62 in. extended length. Its mounts are S1 at the bottom and BP4 at the top.
Key features
- Front position for a 4 in. lift
- 2.38 inch diameter twin tube hydraulic body
- 10.16 in. travel length
- Closed cell foam insert with high flow 9 stage valving
- Lower mount S1 and upper mount BP4
Front shocks on lifted Wranglers
Lifting a Wrangler changes suspension angles and can make the front shocks work at a longer or shorter stroke than stock. Front shocks help control steering wander and body roll, so wear shows up as vague steering or a float after bumps. Replacing a worn shock restores control, though the bushings and track components can also wear at the same time.
Front shock choice should match the lift height and the mount styles already on the truck. Check the mounts for cracks and confirm the shock moves freely through its travel after installation. Wranglers that see frequent off-road use often benefit from inspecting the bump stops, control arm bushings and steering components at the same service interval as the shocks.
- Check mounts for wear before fitting
- Inspect bump stops during the same service
- Replace front shocks in pairs
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7172 |
| UPC | 674866010048 |
| Shock series | Performance |
| Position | Front |
| Shock body | 2.38 inch diameter twin tube hydraulic |
| Piston rod | 9/16 inch chrome hardened |
| Piston | 1 3/8 inch OD |
| Insert | Closed cell foam |
| Valving | High flow 9 stage |
| Collapsed length | 24.78 in. |
| Extended length | 14.62 in. |
| Travel length | 10.16 in. |
| Lower mount | S1 |
| Upper mount | BP4 |
| Reservoir | No |
| Finish | White powdercoat with blue Fabtech logo |
| Lift height | 4 in. lift |
| Fitment type | Direct fit |
Vehicle fitment
The FTS7172 fits the 2004–2006 Jeep Wrangler LJ in Unlimited and Unlimited Rubicon trims, and the 1997–2006 Jeep Wrangler TJ in 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
Wrangler JK models from 2007 onward are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lower mount is S1 and the upper is BP4, so confirm those mount styles match the existing hardware on your Wrangler before fitting.
What’s included
One front shock absorber under part number FTS7172 is described. No brackets or hardware are named.

















