Overview
The Fabtech Dirt Logic 2.5 SS Coilover Shock, part number FTS21207, is a stainless steel coilover pair built for aggressive off-road driving. It is sold as a pair, has no reservoir, and includes Eibach coil springs as part of the GEN II Performance System.
The lift height range is 5 to 6.99 inches, and the rear lift is set with lift blocks and U-bolts. Confirm that your planned lift falls inside that range for your vehicle before ordering.
Key features
- Stainless steel coilover shock design
- Eibach coil springs within the GEN II Performance System
- Non-reservoir configuration
- Listed lift height range of 5 to 6.99 inches
Setting ride height safely
A coilover combines the shock and spring in one unit, so changing the spring preload or length also changes ride height and the geometry at each wheel. When a lift is built with blocks and U-bolts, the axle moves through a different path than a factory-height setup, so the shock length, brake line length and driveline angles all need a look. Stainless steel bodies help resist corrosion from mud, salt and water crossings, which suits a rig that sees hard use.
After installation, recheck the U-bolt nuts after the first drives and again after the first few trail runs, since the axle can settle. Alignment is worth checking after any ride height change, and a shop that works with lifted vehicles can set it correctly.
- Recheck U-bolt nuts after the first few drives
- Check brake hose and sway bar links for stretch at full droop
- Inspect coil springs for seat wear at the spring pads
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS21207 |
| UPC | 674866094055 |
| Shock series | Dirt Logic 2.5 |
| Suspension type | Coilover |
| Body material | Stainless steel |
| Reservoir | No |
| Sold as | Pair |
| Lift height range | 5 to 6.99 in |
| Rear lift method | Lift blocks and U-bolts |
| Coil springs | Eibach |
Vehicle fitment
Match your vehicle’s year, model and trim to the lift range before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rear lift method uses lift blocks and U-bolts, so the lift is set by those parts as well as by shock length. Check alignment and driveline angles after a lift of this kind, because coilovers change ride height.
What’s included
Included: coilover shocks sold as a pair, Eibach coil springs, and lift blocks with U-bolts.







