Overview
The Fabtech Dirt Logic 2.25 rear shock absorber, part number FTS800372, is a monotube gas-charged shock for 2005–2013 Toyota Tacoma trucks in Base, Pre Runner and X-Runner trims. It gives a 6 in. lift for this rear position and mounts in the OE location.
The shock is built with a reservoir and a stainless steel body. It is a 2.25 large-diameter design.
Key features
- Rear gas-charged monotube design
- 2.25 large-diameter body
- Built with a reservoir
- Stainless steel body
- Built for a 6 in. lift.
Rear shock upkeep
Rear shocks control body motion over bumps and under load, and they also keep the rear tires in contact with the road. A worn rear shock can make the truck bounce after dips or sway when cornering. Inspecting the rear shocks at each tire rotation helps catch these changes before they affect handling.
A 6 in. lift changes the rear ride height, so the shock’s extension and travel shift from the original setup. Check the rear brake lines and the driveline angles after raising the rear, since they can be affected by the new height. Keep the mounting hardware torqued and inspect the rubber bushings for cracks.
- Look for oil on the shock body
- Check the mounting bolts for looseness
- Inspect bushings for splits
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS800372 |
| UPC | 674866094666 |
| Shock series | Dirt Logic 2.25 |
| Position | Rear |
| Design | Monotube, gas charged |
| Body material | Stainless steel |
| Reservoir | Included with reservoir |
| Lift height | 6 in. |
Vehicle fitment
It is a direct fit for 2005–2013 Toyota Tacoma trucks in Base, Pre Runner and X-Runner trims.
Tacoma model years outside 2005–2013 and other Toyota trucks are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 6 in. lift changes ride height, so verify the lift on the truck before fitting these rear shocks. Have the alignment checked after the rear shocks are replaced.
What’s included
The Tacoma rear shock is described with reservoir and no extra hardware is named.
Not included: Check the package contents against your installation before starting.








