Overview
The Fab Fours GM15-N3060-1 is a Large Frame black winch mount for the 2015–2018 Chevrolet Silverado 2500 HD and 3500 HD and GMC Sierra 2500 HD and 3500 HD. It is a one-piece, fully welded design.
It slips through the factory tow hook slots and reaches the frame directly, with no separate brackets. The mounts are 3/8 inch steel and the body is 1/4 inch steel.
Key features
- Large Frame design for 2015–2018 heavy-duty trucks
- One-piece, fully welded construction
- Slips through factory tow hook slots straight to the frame
- 3/8 inch steel mounts
- Body constructed from 1/4 inch steel
- Black powder coat finish, with a bare steel option using -b in place of -1
Heavy-duty recovery setup
Heavy-duty trucks often pull heavier loads than light trucks, so the mount and frame connection carry more stress during recovery. This large frame mount spreads load through the factory tow hook slots into the frame. Before use, make sure the frame rails and hooks are free of rust and cracks, since those areas take the pulling force.
Winch cable or rope, hooks and shackles should be matched to the rated capacity and checked before each trip. Replace any worn rope or rusted shackle. Keep the mount’s powder coat intact and touch up chips so steel does not start to rust. Bare steel versions need more frequent care than powder coat.
- Check frame rails and hooks for rust
- Match rope, hooks and shackles to the load
- Touch up chipped finish promptly
- Replace worn rope before each trip
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | GM15-N3060-1 |
| UPC | 5810108885 |
| Mount steel | 3/8 inch steel |
| Body steel | 1/4 inch steel |
| Construction | One piece, fully welded |
| Finish | Black powder coat |
| Alternate finish | Bare steel (-b in place of -1) |
| Mounting | Factory tow hook slots to the frame |
Vehicle fitment
It fits four heavy-duty trucks: the 2015–2018 Chevrolet Silverado 2500 HD and 3500 HD and the GMC Sierra 2500 HD and 3500 HD. It is designed for High Country, LT, LTZ and WT Silverado trims and Base, Denali, SLE and SLT Sierra trims.
Designed for heavy-duty 2500 HD and 3500 HD models from 2015 to 2018. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Slide the mount through the factory tow hook slots until it reaches the frame. No drilling or welding steps are described. Check the winch’s rated capacity against the mount before pulling any load.
What’s included
The mount is one welded piece, and no additional hardware is described with it.
Not included: A winch. The winch itself needs to be obtained separately.









