Overview
The Fab Fours Pre-Runner Front Winch Bumper with D-Rings and Lights in black, part number CH05-A1352-1, is a steel front bumper for the 2003–2006 Chevrolet Silverado 2500 HD and 3500, plus the 2007 Silverado 2500 HD Classic and 3500 Classic. Fab Fours positions it as a premium winch bumper built for strength and durability.
The bumper is made from a combination of 1/4 inch and 3/16 inch steel and accepts winches up to 16,500 lb. Fab Fours includes its fog and turn indicator lights, and describes air ducts as part of the design. Full guard, pre-runner guard and base bumper versions are offered.
Key features
- Winch ready for winches up to 16,500 lb
- Combination of 1/4 inch and 3/16 inch steel
- 3/4 inch D-ring mounts
- 1/4 inch boxed mounting system, adjustable for a custom fit
- Injection-molded light housings with 90mm fog lights and 60mm turn indicator lights included
- Air ducts and more tire clearance
- Two-stage matte black powder coat; bare steel uses -B instead of -1
- The bumper is made in the USA.
Mounting and front weight
Heavy-duty Silverado trucks carry a lot of weight on the front axle, and a steel bumper with a winch mount adds more. The added load can increase wear on springs, shocks, ball joints and tie rod ends over time, so the front end should be inspected more often after installation. Tighten all bumper bolts and recheck them after the first few drives, since steel bumpers tend to settle as the mounts seat.
Winch choice matters with a heavy bumper. Pick a winch whose weight and line pull suit the truck, and avoid overloading the front axle. The boxed mounting system is adjustable, so set it square to the body before tightening. The air ducts help cooling where the bumper is fitted with them, so plan any trimming before installation to keep the structure intact.
- Inspect ball joints and tie rod ends more often
- Set the boxed mount square before tightening
- Plan winch weight within the bumper’s rating
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | CH05-A1352-1 |
| UPC | 5810100056 |
| Product type | Pre-runner front winch bumper |
| Guard style | Pre-runner guard |
| Position | Front |
| Width | Full |
| Material | Steel, 1/4 inch and 3/16 inch |
| Finish | Two-stage matte black powder coat |
| Maximum winch | 16,500 lb |
| D-ring mounts | 3/4 inch, included |
| Included lights | 90mm fog and 60mm turn indicator |
| Winch mount | Included |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2003–2006 Chevrolet Silverado 2500 HD and Silverado 3500, and the 2007 Silverado 2500 HD Classic and 3500 Classic.
Other Silverado model years and the Silverado 1500 are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 1/4 inch boxed mounting system can be adjusted for fit. The fog and turn indicator lights supplied with the bumper need wiring, so plan for that when installing.
What’s included
The pre-runner guard bumper with D-ring mounts, winch mount, 90mm fog lights and 60mm turn indicator lights.
Not included: The winch.









