Overview
The Fab Fours Front Full Width Truck Grumper, part number GR4100-1, is a black powder-coated grille and winch bumper for the 2017–2018 Ford F-250 and F-350 Super Duty.
This Super Duty version has an integrated Adaptive Cruise Control mount in place of sensor cutouts, a 13-piece modular design, mounts for two 2×2 Dually lights per side, and a winch tray for a Warn Zeon up to 12,000 lb. The removable inserts let owners customize the grille section, and the winch tray is 3/16 steel.
Key features
- Combines grille and bumper
- 13-piece modular, customizable design
- Integrated Adaptive Cruise Control mount
- Mounts for two 2×2 Dually lights per side
- Built for a Warn Zeon winch up to 12,000 lb (tested only with Warn Zeon)
- Bolt-on with stainless steel hardware and frame brackets
- 2-stage matte black powder coat
- 11-gauge U.S. steel with 3/16 steel winch tray
Grille bumper and winch use
A grille and winch bumper combines the front face with a recovery point, so the mounting frame carries both the grille section and any winch load. Check the grille inserts and bolts after fitting, and make sure the winch tray and mounts are square. Because the modular design can be customized, keep track of which insert goes where so the grille stays even.
Adaptive cruise control modules need a clear line of sight through the bumper, so keep the mount area clean and check for debris after off-road use. Dually light mounts also need their wiring routed cleanly, away from the winch tray and moving parts. Re-check the stainless bolts after the first few trail runs, and replace any worn winch cable or fairlead before recovery use. Touch up the matte powder coat early where chips appear.
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | GR4100-1 |
| UPC | 5810115739 |
| Position | Front |
| Width | Full |
| Material | U.S. steel, 11 ga.; 3/16 steel winch tray |
| Finish | 2-stage matte black powder coat |
| Winch rating | Up to 12,000 lb (Warn Zeon) |
| D-ring mounts | Included |
| Winch mount | Included |
| Light mounts | Included |
| Fit type | Direct fit |
Vehicle fitment
It is a direct fit for the 2017–2018 Ford F-250 Super Duty and F-350 Super Duty. Confirm fit for your vehicle’s year, model and trim before ordering.
Older Super Duty generations and the F-150 are not covered by this part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bumper bolts on with stainless steel hardware and brackets that tie directly to the frame.
What’s included
- Full-width truck Grumper
- Stainless steel hardware and brackets
- D-ring mounts, winch mount and light mounts
Not included: The Dually lights (not included) and the winch.
















