Overview
The Fab Fours Black Steel FF18-K4562-1 is a front bumper with a Pre-Runner guard for the 2018 Ford F-150, in 14 gauge steel and gloss black powder coat. It is the Pre-Runner guard version of the ranch-style Black Steel bumper.
Fab Fours matched the bumper to the truck’s body lines, with no vertical flanges and tapered edges. Construction combines pipe with tread plate, and bolt-on tow hooks are included. Light mounts are provided for the factory fog lights; the winch mount and 1-inch D-rings are optional.
Key features
- Pre-Runner guard front bumper for the 2018 Ford F-150
- Pipe and tread plate construction
- 14 gauge steel, gloss black powder coat
- Bolt-on tow hooks included
- Light mounts for factory fog lights
- Optional winch mount for winches up to 12,000 lb
- Optional 1-inch D-ring mounts
- Optional KGMOD-1 bracket retains adaptive cruise control
- Made in the USA
Pre-Runner guard and airflow
A Pre-Runner guard shields the grille and lower front end from brush and rock while leaving the bumper’s sides open, so it suits trail driving that puts branches close to the nose. The pipe and tread plate construction gives the front a solid profile, and the tapered edges help the bumper follow the body lines when the truck is driven through tight spots.
Before adding accessories, check that the bumper leaves enough room for radiator airflow and that any lights do not block the headlight beam. Winch loads and recoveries stress the bolts, so inspect the mounts after each trip. Keep the tow hooks clean and check for cracks where they meet the bumper frame.
- Inspect bolts after rough trail runs
- Keep radiator airflow unobstructed
- Check tow hook mounting points for cracks
- Plan winch and light wiring before fitting
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | FF18-K4562-1 |
| UPC | 5810115470 |
| Product type | Front bumper with Pre-Runner guard (Black Steel ranch style) |
| Position | Front |
| Width | Full |
| Material | Steel, 14 gauge |
| Finish | Gloss black powder coat |
| Construction | Pipe and tread plate |
| Tow hooks | Bolt-on, included |
| Winch mount | Optional, not included |
| D-ring mounts | Optional, 1-inch, not included |
| Optional cruise control bracket | KGMOD-1 |
Vehicle fitment
It is a direct-fit front bumper for the 2018 Ford F-150.
Other F-150 generations and Super Duty models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Tow hooks bolt on, and so do the optional winch mount and D-ring mounts. A truck with adaptive cruise control can use the KGMOD-1 relocation bracket.
What’s included
- Front bumper with Pre-Runner guard
- Bolt-on tow hooks
- Light mounts for factory fog lights
Not included: The winch mount, D-ring mounts and relocation bracket, all optional extras.
















