Overview
The Rigid Industries E-Series 10 Deg. Spot LED Light, part number 110213, is a rectangular LED light bar with a narrow 10 degree spot beam. It is listed in a 10 inch size with a 0 to 10 inch range, and it can be mounted to a surface or on a bracket.
The bar is sold as a single unit with a clear lens and LED bulb type. The E-Series grew out of off-road lighting and is now used on power sports, marine, general automotive and first responder vehicles. This bar is universal fit, so the decision rests on mounting position, aim and wiring.
Key features
- Narrow 10 degree spot pattern
- Rectangular LED bar with a 10 inch size listed
- Surface or bracket mounting
- Clear lens, sold as one unit
- Spot is one of the E-Series beam choices next to Flood, Driving, Hyperspot and Diffused
- Rigid credits recent E-Series PRO LED changes with up to 111% more raw lumens
Aiming and setup checks
A 10 degree spot pattern is narrow, so the aim matters more than on a wider bar. Set the aim with the vehicle parked on level ground, marking a target at a known distance so you can repeat the setting later. A small tilt that looks harmless up close can move the lit spot well off the trail at longer range.
Once aimed, check the bar after the first few drives, since vibration can shift a surface mount or a bracket slightly. Keep the lens clean and inspect the cable for rubbing. A narrow beam is most useful when it stays steady, so a quick recheck after rough roads saves time at night.
- Aim with the vehicle on level ground
- Mark a target to repeat the setting
- Recheck aim after rough roads
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 110213 |
| UPC | 849774028939 |
| Type | Spot |
| Beam | 10 degree spot |
| Light shape | Rectangular |
| Bulb type | LED |
| Lens color | Clear |
| Mounting type | Surface or bracket |
| Size | 10 inch; listed range 0 to 10 inch |
| Sold as | Single |
| Fitment | Universal fit |
Vehicle fitment
This spot bar is universal fit and names no vehicle. Pick a surface or bracket position that keeps the bar clear of body panels and lets you aim the 10 degree beam.
A narrow spot rewards careful aiming, so set the angle once the bar is fixed and recheck it after any bracket adjustment.
Installation notes
Power the bar through a switch and a fused relay. Aim it after mounting, and check local rules for auxiliary lights before using it on public roads.
What’s included
One E-Series 10 Deg. Spot LED light bar, sold as a single unit.
Not included: Check the package contents against your installation before starting. Wiring and a switch are not part of this package.









