Overview
The Flowmaster FlowFX Series muffler 71226 is a straight through muffler with 2.5 inch inlet and outlet tubes and a brushed finish. Its 409S stainless steel case is paired with an offset inlet and a centered outlet. Flowmaster gives the FlowFX 71226 a universal fit listing, so the 2.5 inch tube size and inlet and outlet placement are the points to verify.
The FlowFX series is built for drivers who want a different tone from chambered mufflers. Its sound sits at a moderate performance level.
Key features
- Straight through design for a different tone than chambered mufflers
- Moderate performance sound level
- 409S stainless steel case
- 2.5 inch inlet and 2.5 inch outlet
- Offset inlet with centered outlet
- Brushed finish
Straight through tone and fit
A straight through muffler uses a direct gas path with sound-absorbing material rather than chambers. Many drivers pick this type for a sound that differs from chambered designs, often a more open tone at higher revs. The tone can be louder on the highway, so consider how the vehicle is driven before choosing one.
Brushed stainless finishes show fingerprints and heat marks differently than polished ones. Clean with a soft cloth and a mild cleaner. Inlet offset and outlet placement affect how the exhaust sits under the car, so test clearance before final tightening of the hangers.
- Check the sound level against local rules
- Confirm the tailpipe clears the bumper and body
- Support the system so the muffler carries none of the pipe weight
Specifications
| Brand | Flowmaster Exhaust |
|---|---|
| Part number | FLW71226 |
| Muffler type | Straight through |
| Inlet location | Offset |
| Outlet location | Centered |
| Tube size (inlet/outlet) | 2.5 inches / 2.5 inches |
| Material | Stainless steel, 409S case |
| Finish | Brushed |
| Fitment | Universal fit |
Vehicle fitment
This muffler is not built for one vehicle. Check that your exhaust uses 2.5 inch tubing and that the offset inlet lines up with your pipe.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The inlet is offset and the outlet is centered, so compare that layout with your exhaust routing before cutting or fitting pipe. Support the exhaust so the muffler is not carrying the weight of the pipe.
What’s included
One FlowFX straight through muffler with brushed finish.
Not included: the tailpipe, connecting pipe and hangers needed to mount it.











