Overview
The Dick Cepek Torque 17×8.5 wheel in black is a 17-inch spoke wheel, 8.5 inches wide, with a 5 on 5 bolt pattern and an 84 center bore. Part number D/C90000000066 carries a 6 offset and 5 backspacing. Universal fit is the stated fitment, so the bolt pattern and center bore are the first things to match.
The Torque series suits newer trucks and SUVs that need brake caliper clearance and factory tire pressure monitoring sensor compatibility. The finish is black with machined accents under a satin clear coat over aluminum, and it works for on-road and off-road driving.
Key features
- 17-inch diameter and 8.5-inch width in a spoke design
- 5 on 5 bolt pattern with an 84 center bore
- 6 offset and 5 backspacing
- Black finish with machined accents and satin clear coat
- Torque series styling
Hub fit and wheel care
Hub fit matters more with a 5 on 5 pattern because a small mismatch in the center bore or stud layout can prevent the wheel from seating flat. Hub-centric rings can close a gap between the center bore and the hub, while lug nuts must match the wheel’s seat type. Measure before ordering and before mounting, and do not force a wheel that will not sit flush.
Inspect the spokes, the lip and the bead seat after rough trail runs for cracks, bends and scrapes. Check the lug torque after the first few drives and again periodically. Replace a cracked or bent wheel rather than repairing it, since a weakened spoke can fail under load.
- Center bore and hub-centric rings
- Lug nut seat type
- Bead seat and lip inspection
- Torque checks after the first drives
Specifications
| Brand | Dick Cepek |
|---|---|
| Part number | D/C90000000066 |
| Series | Torque |
| Style | Spoke |
| Finish | Black |
| Construction | Aluminum |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 84 |
| Offset | 6 |
| Backspacing | 5 |
| Fitment | Universal fit |
Vehicle fitment
No vehicle is named for this wheel. Because the bolt pattern is 5 on 5, confirm it closely against your hub before comparing other measurements. A vehicle match should come from measured hub specifications rather than from the wheel’s style.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the hub and confirm the 5 on 5 pattern and 84 center bore before mounting. A wheel that does not seat flat against the hub should not be installed on the vehicle.
What’s included
This is the wheel itself. Tires and lug hardware need to be obtained separately before mounting.
Not included: tires and lug hardware.






