Overview
The Decked DR2 is a truck bed organizer for the 2003–2009 Dodge Ram 2500 and 3500, with a listed bed length of 64 inch. It lifts the cargo deck above the bed floor and provides full-length drawers, side storage and flip-lid beverage holders, keeping gear dry while leaving the bed usable for other loads.
The deck is recycled high density polyethylene molded over a steel subframe, and most of that steel is recycled. The unit hooks to the tie-downs already in the truck, so the bed does not need drilling. Removal takes about 20 minutes when the full bed is needed.
Key features
- Recycled polyethylene deck over a steel subframe, most of the steel recycled
- Drawers rated at 200 lbs each and built to roll smoothly
- Bed-length drawers ride on sealed bearing wheels
- Weatherproof storage that Decked says resists UV light, moisture and temperature extremes
- Cast aluminum handles, oversized for easy pulling
- Four storage areas on each side of the wheel wells
- Flip the lids for eight beverage holders or a spot for nuts, bolts and screws
- Stainless steel edge guard ruler and bottle opener
Loading the drawers
Weight is spread across the drawers, so how you pack them affects the whole organizer. Put heavier tools in the drawer nearest the middle of the bed, where the load is easiest to balance, and use the smaller storage areas for lighter parts. Keep the bed area clear while loading so nothing blocks the drawers. Each drawer should stay under its own rating, so spread bulky items across more than one drawer when a single one fills quickly.
Make a habit of checking the mounting after the first few trips with a new load. Confirm the tie-downs have not shifted, look at the drawer wheels for grit, and make sure the lids still seat flat. Removing the organizer for a long load is simple when the hardware is kept together in one place.
- Balance weight across drawers
- Keep lids closed in dusty conditions
- Store removed hardware together
Specifications
| Brand | Decked Bed Organizer |
|---|---|
| Part number | DR2 |
| UPC | 851945005144 |
| Bed length | 64 inch |
| Deck construction | Recycled high density polyethylene over a steel subframe |
| Drawer capacity | 200 lbs each |
| Drawer wheels | Sealed bearing |
| Handles | Cast aluminum, oversized |
| Included extras | Stainless steel edge guard ruler and bottle opener |
| Removal time | About 20 minutes |
| Warranty | Three year limited |
Vehicle fitment
The manufacturer fitment list for the DR2 covers the 2003–2009 Dodge Ram 2500 in the Laramie, Power Wagon, SLT, ST, SXT, Sport and TRX4 trims, and the 2003–2009 Dodge Ram 3500 in the Laramie, SLT, ST, SXT, Sport and TRX4 trims.
The 1995–2002 Ram 2500, the Ram 1500 and Ram models from 2010 onward are not in this list. Compare your truck’s year, model and trim with this list before choosing a part number.
Installation notes
No drilling is required, since the unit attaches to the existing tie-downs.
What’s included
The organizer system comes with its drawers, storage areas, cast aluminum handles, a stainless steel edge guard ruler and a bottle opener.











