Overview
The Decked Bed Organizer DR3 is a truck bed organizer that raises the deck and adds rolling drawers, ammo cans and flip-up lids to a 5.7 foot truck bed. It fits the 2009–2010 Dodge Ram 1500, the 2018 Ram 1500 and the 2019 Ram 1500 Classic, with the trims given in the vehicle fitment section below.
Decked developed this system so tools, hardware and other items can be stored securely, out of the way and out of the weather, while the rest of the bed stays free for cargo. It is built from 100% recycled high density polyethylene co-molded to a steel sub frame, and most of the steel is also recycled.
Key features
- Full bed-length drawers that roll smoothly on sealed bearing wheels.
- Drawers engineered to hold 200 lbs. each.
- Ammo cans provide four areas of extra storage on either side of the wheel wells.
- Flip the lids for eight beverage holders or a place to keep nuts, bolts and screws.
- Oversized cast aluminum handles.
- Stainless steel edge guard ruler and bottle opener.
- The drawers are weatherproof and designed to handle UV light, moisture, and extreme heat or cold.
- Attaches to the existing tie-downs in the truck bed without drilling.
Load balance and tie-down care
Each part of a bed organizer carries a different share of the load, so plan where things go. Drawers handle the heavy tools, the ammo cans take smaller spares, and the flip lids hold drinks or small hardware. Place the heaviest drawer toward the middle of the bed to keep the unit balanced side to side during turns.
Tie-downs are the connection between the organizer and the truck, so check them before each trip with heavy loads. Look for cracks, bent parts and loose hardware, and tighten or replace worn pieces. Keep the bed floor clear of debris so the unit seats level. After rough roads, run a quick check of the drawer wheels and the lids to confirm everything still moves freely.
Specifications
| Brand | Decked Bed Organizer |
|---|---|
| Part number | DR3 |
| UPC | 851945005151 |
| Bed length | 5.7 foot |
| Construction | 100% recycled high density polyethylene co-molded to a steel sub frame |
| Steel content | Most of the steel is recycled |
| Drawer load rating | 200 lbs. each |
| Handles | Oversized cast aluminum |
| Edge guard | Stainless steel ruler |
| Attachment | Existing tie-downs, no drilling |
| Removal time | About 20 minutes |
| Warranty | Three year limited warranty |
Vehicle fitment
The DR3 fits the 2009–2010 Dodge Ram 1500 in Laramie, SLT, ST, Sport, TRX and TRX4 trims; the 2018 Ram 1500 in Big Horn, Express, Laramie, Laramie Longhorn, Limited, Lone Star, Rebel, SLT, ST, Special Service, Sport and Tradesman trims; and the 2019 Ram 1500 Classic in Big Horn, Express, Lone Star and Special Service trims.
It does not fit the 2011–2017 Ram 1500 or Ram 2500 and 3500 trucks. Confirm the year, model and trim of your vehicle before purchase.
Installation notes
The system attaches to the tie-downs already in the truck bed, so drilling is not needed. It can be removed in about 20 minutes. Check that the tie-downs hold firmly before loading the drawers with heavy tools.
What’s included
The organizer includes full bed-length drawers, ammo can storage on either side of the wheel wells, flip-up lids with beverage holders, a stainless steel edge guard ruler and a bottle opener. Verify those parts before you begin fitting the unit.












