Select your vehicle

Decked Bed Organizer Truck Bed Organizer – DF3

Decked Bed Organizer

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Decked DF3 truck bed organizer for a 6’6 bed
  • Full bed-length drawers rated at 200 lbs. each
  • Mounts to existing tie-downs with no drilling
  • Universal Fit listed, so match your bed length
  • Edge guard ruler in stainless steel and a bottle opener

Description

Overview

The Decked DF3 is a truck bed organizer for a 6’6 bed, built to raise the deck so tools, hardware and other items stay secure and out of the weather while the rest of the bed stays open for cargo. It attaches to the existing tie-downs in your truck, so the bed does not need to be drilled.

The DF3 is built from 100% recycled high density polyethylene co-molded to a steel sub frame, and most of the steel is also recycled. The drawers are full bed-length and roll smoothly on sealed bearing wheels. It is not built around one truck model, so bed length is the main thing to check before you buy.

Owners who haul job-site tools, recovery gear or camping supplies in a pickup often want their bed floor back. This organizer moves that gear into weatherproof drawers, and the ammo cans and flip-over lids add storage without taking more cargo room.

Key features

  • Drawers engineered to hold 200 lbs. each and roll smoothly
  • Full bed-length drawers on sealed bearing wheels
  • Oversized cast aluminum handles
  • Ammo cans give four extra storage areas beside the wheel wells
  • Flip-over lids: eight beverage holders, or a spot for nuts, bolts and screws
  • Stainless steel edge guard ruler and bottle opener
  • Weatherproof, and built to handle UV light, moisture, and extreme heat or cold

Tie-down mounting basics

Truck bed organizers rely on the bed’s tie-down points to stay in place, so the condition of those anchors matters as much as the organizer itself. Before loading, inspect the tie-downs for cracks, bent hardware or loose fasteners, and make sure the organizer sits level and square in the bed. Recheck the fit after the first few trips over rough ground, since vibration can shift any load that is not seated evenly.

Drawer organizers also change how weight sits in a pickup. Keep heavier tools in the drawers closest to the cab and spread weight side to side, which helps the truck handle more predictably on the road. When the bed is needed for long cargo, removing the unit and storing it dry keeps the polyethylene and hardware in good shape.

Specifications

Brand Decked Bed Organizer
Model DF3
UPC 700006942571
Bed length 6’6 bed
Construction 100% recycled high density polyethylene co-molded to a steel sub frame (most of the steel is also recycled)
Drawer capacity 200 lbs. each
Handles Oversized cast aluminum
Warranty Three year limited
Installation No drilling; removable in about 20 minutes

Vehicle fitment

The DF3 is not built around one truck model. Fit depends on bed length, and this version is sized for a 6’6 bed. Confirm fit for your bed length before ordering.

The DF3 will not work with a factory tailgate step. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The system attaches to the existing tie-downs, so no drilling is needed. Removal takes about 20 minutes, which makes it practical to take off when the full bed is needed. Keep every drawer’s load inside its 200 lbs. rating.

What’s included

The stainless steel edge guard ruler and bottle opener are built into the organizer. No other included items are named.

SKU: DEKDF3 Category:

Specification

Shipping weight 225.00 lbs
Package dimensions 76.00 × 38.00 × 17.00 in
brands

Questions & Answers

Does the DF3 fit my truck?

The DF3 is not built around one truck model, so no single truck is matched to it. Bed length decides fit, and this version is sized for a 6'6 bed. Measure your bed and confirm before ordering.

Do I need to drill the bed to install it?

No. The system attaches to the existing tie-downs in your truck, so the bed does not need drilling. Removal takes about 20 minutes.

Will it work with a factory tailgate step?

No. The DF3 will not work with a factory tailgate step, so check your tailgate setup before buying. Verify your vehicle's year, model and trim before purchase.

How much weight does each drawer hold?

Each drawer is engineered to hold 200 lbs. while rolling smoothly on sealed bearing wheels. The organizer carries a three year limited warranty.

How often should I check the tie-downs on a bed organizer?

Check them before any trip with heavy loads and after rough off-road driving. Look for cracks, bent parts and loose fasteners, then tighten or replace anything worn. Regular checks help the organizer stay secure over time.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon