Overview
The Decked DS3 is a truck bed organizer for the 2017–2019 Ford F-250 Super Duty and F-350 Super Duty, sized for a 6′ 9 inch bed. Its deck raises the cargo area above the bed floor and holds full-length drawers and side storage, giving tools and hardware a secure spot that stays out of the weather.
The organizer is a precise fit with no gaps between the deck and the bed sidewalls. It mounts to the existing tie-downs, so the truck does not need to be drilled. Removal takes about 20 minutes.
Key features
- Precise fit with no gaps between the deck and the bed sidewalls
- Recycled HDPE deck co-molded to a steel subframe, most of the steel recycled
- Full bed-length drawers on sealed bearing wheels
- Weatherproof drawers that Decked says resist UV light, moisture and extreme temperatures
- Oversized cast aluminum handles
- Ammo cans give four areas of additional storage on either side of the wheel wells
- Flip-lid beverage holders, eight in total, or storage for nuts, bolts or screws
- Stainless steel edge guard ruler and bottle opener
Keeping the deck and drawers working
A bed organizer that sits on the existing tie-downs carries its load through those anchor points and the bed sidewalls, so how you load it matters as much as how it is fitted. Spread heavy tools toward the middle of each drawer and keep dense items low to reduce strain on the wheels and handles. Before each trip, check that the tie-down hardware is snug and that the drawers roll and close without catching.
Over time, look for cracked handles, bent drawer rails or wheels that stick. Clean the deck and drawer tracks with mild soap and water, and dry them before storing gear. Grit trapped under the wheels is a common cause of drag, so brush it out periodically.
- Check tie-down hardware after rough roads
- Inspect wheels for flat spots or debris
- Rinse grit from drawer tracks
- Watch for hairline cracks around the handles
Specifications
| Brand | Decked Bed Organizer |
|---|---|
| Part number | DS3 |
| UPC | 851945005472 |
| Bed length | 6′ 9 inch |
| Deck construction | Recycled high density polyethylene co-molded to a steel subframe |
| Drawer capacity | 200 lbs each |
| Drawer wheels | Sealed bearing |
| Handles | Oversized cast aluminum |
| Included extras | Stainless steel edge guard ruler and bottle opener |
| Warranty | Three year limited |
Vehicle fitment
The manufacturer fitment list covers the 2017–2019 Ford F-250 Super Duty in the King Ranch, Lariat, Limited, Platinum, XL and XLT trims, and the 2017–2019 Ford F-350 Super Duty in the same six trims.
Super Duty model years outside 2017 through 2019, and the F-450 model, are not in this list. Compare your truck’s year, model and trim with the list above first.
Installation notes
The organizer will not work with the factory tailgate step, so check the tailgate step on your truck before fitting. It uses the existing tie-downs and needs no drilling.
What’s included
The system includes the drawers, storage areas, cast aluminum handles, a stainless steel edge guard ruler and a bottle opener. Check the package contents against your installation before starting.


























