Overview
The Decked DS2 is a truck bed organizer listed at 69 inches. It raises the deck with full bed-length drawers, so tools, hardware and loose gear stay secure and dry while the open bed remains usable. The system attaches to the existing tie-downs in your truck, so the bed does not need drilling.
The DS2 is built from 100% recycled high density polyethylene co-molded onto a steel sub frame, and most of the steel is recycled. Each drawer is engineered to hold 200 lbs. and rolls smoothly on sealed bearing wheels. It is sold as Universal Fit, so compare your bed length with the 69 inch size before buying.
Shoppers who carry job-site tools, recovery straps or camping gear in a pickup bed usually want the floor back. The DS2 provides that room, and its ammo cans and flip-over lids add storage without using cargo space.
Key features
- Drawers rated for 200 lbs. each while rolling smoothly
- Sealed bearing wheels carry the full bed-length drawers
- Cast aluminum handles, oversized for an easy pull
- Ammo cans add four storage areas on either side of the wheel wells
- Lids flip over to form eight beverage holders or a tray for nuts, bolts and screws
- Edge guard ruler in stainless steel, plus a bottle opener
- Stands up to UV light, wet weather, and extreme heat or cold
Keeping gear dry and secure
A raised deck organizer keeps the cargo floor clear while putting heavy items within reach. Drawers that run the full bed length spread weight across the bed, and sealed compartments keep tools and hardware out of rain and road spray. Load the heaviest items first and keep them centered between the wheel wells to reduce sway.
Check the tie-down points before each trip, since the system relies on them for hold. Tighten or replace straps that show fraying, and recheck the mounts after rough roads. Removing the organizer takes a short time, so the bed can be cleared quickly when a long load needs the full length.
- Load heavy items low and centered
- Inspect tie-down straps and hardware regularly
- Keep the lids closed while driving
- Wipe the bearing wheels clean after dusty trips
Specifications
| Brand | Decked Bed Organizer |
|---|---|
| Model | DS2 |
| UPC | 851945005045 |
| Listed size | 69 inches |
| Build | Recycled high density polyethylene (100%) co-molded onto a steel sub frame; most of the steel recycled |
| Drawer load | 200 lbs. each |
| Handles | Cast aluminum, oversized |
| Extras | Edge guard ruler (stainless steel) and bottle opener |
| Warranty | Three year limited |
| Installation | No drilling; about 20 minutes to remove |
Vehicle fitment
The DS2 is sold as Universal Fit with a size of 69 inches. Match that size against your bed length. Confirm fit for your vehicle’s year, model and trim before ordering.
The DS2 will not work with a factory tailgate step. Check your vehicle’s year, model and trim before ordering.
Installation notes
Attach the system to the existing tie-downs and skip drilling. Removal takes about 20 minutes, so the bed can be cleared quickly when you need the full length for cargo.
What’s included
The edge guard ruler and bottle opener are built into the unit. No other items are named as included.











