Overview
The Decked Bed Organizer DF5 is a truck bed organizer for the 2015–2018 Ford F-150. It raises the deck to create full bed-length drawers for tools, hardware and other items, and leaves the rest of the bed open.
The DF5 is built from 100% recycled high density polyethylene co-molded to a steel sub frame, with most of the steel also recycled. It is made for a 6 foot 6 inch bed and does not fit 8′ long truck beds. The system attaches to the existing tie-downs, so no drilling is needed.
It suits owners who want heavy tools and hardware kept off the bed floor and out of the weather, and who still need the open bed for other loads. A spray-in bed liner and a Bedrug mat are compatible, while a drop-in plastic bed liner and a Bedrug full liner are not.
Key features
- Full bed-length drawers, each engineered to hold 200 lbs. while rolling smoothly on sealed bearing wheels.
- Oversized cast aluminum handles on the drawers.
- The drawers are weatherproof and designed to handle UV light, moisture, and extreme heat or cold.
- Four ammo can storage areas on either side of the wheel wells.
- Lids flip to give eight beverage holders or a place for nuts, bolts, and screws.
- Stainless steel edge guard ruler and bottle opener.
- Attaches to existing tie-downs with no drilling; removal takes about 20 minutes.
Liner choices and bed size
Bed liners and bed organizers share the same floor, so the liner type affects how the drawers sit. Thin drop-in liners can change the fit of the drawer system, while spray-in liners bond to the bed and leave the floor level. Mats work differently again, so decide on the liner before you choose the organizer and measure the bed with it in place.
Bed length is the other key check. A 6 foot 6 inch bed is a different match from longer beds, and measuring inside the bed from the tailgate to the front wall gives the number you need. Keep a tape measure in the truck for quick checks. Recheck the fit after any change to the liner or the tie-down setup.
Specifications
| Brand | Decked Bed Organizer |
|---|---|
| Part number | DF5 |
| UPC | 851945005304 |
| Construction | 100% recycled high density polyethylene co-molded to a steel sub frame |
| Steel content | Most of the steel is recycled |
| Drawer load rating | 200 lbs. each |
| Handles | Oversized cast aluminum |
| Drawer wheels | Sealed bearing wheels |
| Edge guard | Stainless steel ruler |
| Bed length | 6 foot 6 inch |
| Mounting | Existing truck bed tie-downs; no drilling |
| Removal time | About 20 minutes |
| Warranty | Three year limited |
| Liner compatibility | Not with drop-in plastic liner or Bedrug full liner; works with spray-in liner and Bedrug mat |
Vehicle fitment
The DF5 fits the 2015–2018 Ford F-150 in King Ranch, Lariat, Platinum, SSV, XL and XLT trims. Fitment is limited to those years and trims with the 6 foot 6 inch bed size noted above.
Other Ford F-150 years and other trucks are not on the list, and 8′ long beds are excluded. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The DF5 uses the tie-downs already in the bed, so the bed is not drilled. Measure the bed length before fitting, and pick a liner that matches the compatibility list above, since the drop-in plastic liner and Bedrug full liner are excluded.
What’s included
The DF5 includes its drawers, ammo can areas, flip-up lids, steel edge guard ruler and bottle opener. Verify those parts before you begin fitting the unit.














