Overview
The Decked DF4 is a truck bed organizer for a 5′ 6″ bed that adds full bed-length rolling drawers on a steel sub frame, attaching to the truck’s existing tie-downs with no drilling.
The system was designed so tools, hardware and other items can be stored securely, out of the way and out of the weather, while the rest of the truck bed stays usable. The drawers roll on sealed bearing wheels and each drawer is engineered to hold 200 lbs. Bed length and liner type are the key compatibility points.
Key features
- Built from 100% recycled high density polyethylene co-molded to a steel sub frame (most of the steel is also recycled)
- No drilling needed; attaches to the existing tie-downs in the truck
- Full bed-length drawers on sealed bearing wheels, weatherproof
- Each drawer is engineered to hold 200 lbs.
- Oversized cast aluminum handles
- Ammo cans give four areas of extra storage on either side of the wheel wells; flipped lids give eight beverage holders
- Stainless steel edge guard ruler and bottle opener
- Can be removed in about 20 minutes; three year limited warranty
Planning a bed drawer system
A bed drawer system turns the open bed into storage that can be reached from the tailgate. The gain is in organization: heavy tools and fluids sit low and secure, and smaller items stay dry. Because the drawers slide out over the bed floor, the bed needs room to clear the drawers, and the tailgate has to open fully with the system in place.
Weight matters as much as capacity. Keep the heaviest items in the drawers closest to the cab, and spread the load across the sub frame instead of stacking everything in one drawer. Check the tie-down points before loading, and avoid exceeding the drawer rating even when a single item seems to fit.
- Load heavy items low and near the cab
- Check tie-down points before each trip
- Keep drawer tracks clean of grit
- Recheck fasteners after rough road use
Specifications
| Brand | Decked Bed Organizer |
|---|---|
| Part number | DF4 |
| UPC | 851945005298 |
| Product type | Truck bed organizer with drawers |
| Bed length | 5′ 6″ |
| Material | Recycled high density polyethylene co-molded to a steel sub frame |
| Drawer capacity | 200 lbs. each |
| Drawer hardware | Sealed bearing wheels, oversized cast aluminum handles |
| Edge guard | Stainless steel, with ruler and bottle opener |
| Mounting | Attaches to existing tie-downs, no drilling |
| Removal time | About 20 minutes |
| Warranty | Three year limited |
| Fitment type | Universal fit |
Vehicle fitment
The DF4 is made for a 5 ft 6 in bed and does not fit 8 ft long truck beds. It does not fit with a drop-in plastic bed liner but works with a spray-in bed liner, and it does not fit with a Bedrug full liner but works with a Bedrug mat.
Measure your bed length and confirm it is 5 ft 6 in before ordering. Match the year, model and trim of your truck to the fit before buying.
Installation notes
Follow the installation steps and torque all fasteners to the values in the installation instructions.
- Check the part against your vehicle before starting work.
- Re-check fasteners after the first miles of driving, and again after hard off-road use.
- Confirm your bed length is 5′ 6″ and remove any drop-in plastic liner or full Bedrug liner first.
- Attach the system to the existing tie-downs rather than drilling the bed.
- Do not exceed the 200 lbs. per drawer rating.
What’s included
- Decked DF4 drawer system for a 5′ 6″ bed
- Ammo cans, oversized cast aluminum handles and a stainless steel edge guard
Not included: Fasteners, the truck and any bed liner are not included.















