Overview
The Daystar Locking D-Ring Isolator in purple, part number KU70058PR, is a polyurethane sleeve that snaps onto a standard 3/4-inch D-ring to stop it banging against the bumper. It also protects the bumper finish from scratches caused by D-ring contact.
Its built-in lanyard is the locking feature. The lanyard loops through the hole in the D-ring bolt, which keeps the bolt from unscrewing itself, and it keeps the D-ring attached so it cannot be lost on the trail. Daystar sells these in pairs for vehicles that carry standard 3/4-inch recovery D-rings.
Key features
- Purple durable polyurethane construction
- Snaps onto any standard 3/4-inch D-ring
- Stops D-ring rattles against the bumper
- Protects the bumper finish from D-ring contact
- Built-in lanyard keeps the D-ring from being lost
- Lanyard loops through the bolt hole to prevent the bolt from unscrewing
Keeping recovery gear quiet
Rattle is usually a sign that metal is moving against metal. On a trail vehicle, a D-ring that knocks the bumper or mounting tab will repeat that sound on every washboard stretch. A polyurethane sleeve breaks that contact, which quiets the rig and spares the paint. It works best when the bolt and pin are already snug, since a loose connection can still move enough to make noise.
Choosing purple is mainly a matter of matching the rig or making the gear easy to spot. Make sure the finish suits your build, then focus on the parts that wear faster: the lanyard, the bolt hole and any washers at the mounting tab. Check the lanyard after each run for fraying, and retighten the bolt whenever the vehicle has been on rough ground.
Specifications
| Brand | Daystar |
|---|---|
| Part number | KU70058PR |
| UPC | 618089011093 |
| Color | Purple |
| Material | Polyurethane |
| D-ring size | Standard 3/4-inch D-ring |
| Quantity | Sold as a pair |
Vehicle fitment
It is a universal fit accessory, not a vehicle-specific part. It works on any vehicle whose recovery point uses a standard 3/4-inch D-ring or shackle.
Measure your D-ring before ordering. The isolator is sized for standard 3/4-inch rings, so confirm that size first.
Installation notes
The isolator snaps over the D-ring, and the lanyard is threaded through the hole in the D-ring bolt. Polyurethane washers are sold separately and are not part of this purchase, so plan for them if your setup calls for them.
What’s included
A pair of Locking D-Ring Isolators in purple, with built-in lanyards.
Not included: Polyurethane washers, which Daystar sells separately.









