Overview
The Daystar KJ04508BK is a 1 inch body lift kit made from complete replacement body mounts rather than spacer blocks placed on top of the factory mounts. Each mount is designed to raise the body 1 inch, adding clearance under the body while keeping it seated on the frame. The kit is listed with a Direct Fit design, but no specific vehicle, year or model is named for it.
Body lifts like this one suit builds that run high-clearance skid plates, often called belly-up setups, engine conversions, and larger tires and wheels. Because the body is moved 1 inch, the fuel filler neck, wiring and steering sector shaft need no other changes.
Key features
- Complete replacement body mounts that add 1 inch of height
- Polyurethane blend that Daystar says resists vehicle fluids and road grime
- Black bushings
- Isolates the body from chassis noise and vibration
- Keeps the body properly aligned with the frame
- All necessary hardware included for installation
- Transfer case linkage brackets included on some applications
- No separate changes needed for the fuel filler neck, wiring or steering sector shaft
Before a body lift
A body lift raises the cab and bed on the frame without changing the suspension. That keeps the factory suspension geometry in place, but it does move the body relative to components that run between body and frame. Look at the brake lines, shifter linkage and transfer case linkage, and make sure they have slack after the body moves.
Body mounts wear over time, so the old mounts are worth inspecting even when they are being replaced anyway. Check the body and frame mounting surfaces for rust and cracks. Tire clearance and steering feel should be checked after the lift, since changes to tire size and wheel offset can affect rubbing and steering response.
- Check brake lines and wiring for slack
- Inspect frame mounting surfaces for rust
- Re-torque mounting bolts after the first drive
- Check tire clearance after fitting
Specifications
| Brand | Daystar |
|---|---|
| Part number | KJ04508BK |
| UPC | 814423010078 |
| Lift height | 1 inch |
| Spacer material | Polyurethane |
| Bushing color | Black |
| Fitment label | Direct Fit |
| Included hardware | All necessary installation hardware |
Vehicle fitment
No vehicle, year, model or trim is named for this kit, so fit cannot be confirmed here. Direct Fit is the mounting design, not a vehicle coverage list. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The complete mounts replace the factory body mounts and come with the hardware needed to fit them. Because the body moves 1 inch, have the transfer case linkage brackets checked on applicable vehicles, and inspect the other components the kit touches for wear or cracking, especially on an older vehicle. Lifting the body changes its position on the frame, so have a qualified installer confirm alignment before the vehicle is driven.
What’s included
The box includes replacement body mounts with black bushings, all the necessary hardware for installation, and transfer case linkage brackets on some applications.









