Overview
The Daystar PA932 is a 2-inch body lift kit for the 1987-1995 Jeep Wrangler YJ. It is also known as the Performance Accessories 932 body lift kit and is made in the U.S.A.
A body lift raises the body off the frame while the frame stays in place. The kit allows the use of tires up to 32-inch diameter on the Wrangler YJ, and installation takes 3 to 4 hours.
Key features
- Two inches of body lift for 4WD Wrangler YJ models
- Allows tires up to 32-inch diameter
- Fiberglass reinforced nylon lift blocks
- Transfer case pivot and radiator dropdown brackets
- Zinc plated, laser cut brackets
- High strength hardware included
Before you lift
A body lift is a spacer system. It sits between the body mounts and the frame, so the body rides higher while the drivetrain, axles and steering keep their original positions. The change is mostly felt in the cab and body rather than in suspension geometry. Larger tires still need gearing and fender clearance checked, since a taller tire changes how the vehicle accelerates and steers at speed.
Because the body moves, check the cables, brake lines and wiring that run between the body and frame. Look for stretching or pinching once the lift is complete, and recheck the hardware after the first few trail runs. Worn body mounts are common on older Wranglers, so inspect the rubber bushings and mounting points before fitting new blocks.
- Check throttle and shifter linkage for stretch
- Recheck hardware after the first trail runs
- Inspect body mounts for cracks or wear
Specifications
| Brand | Daystar |
|---|---|
| Part number | PA932 |
| UPC | 618089006228 |
| Lift height | 2 inches |
| Maximum tire diameter | 32 inches |
| Lift blocks | Fiberglass reinforced nylon |
| Brackets | Laser cut and zinc plated |
| Hardware | High strength hardware included |
| Bumper brackets | Not included |
| Made in | U.S.A. |
| Fitment | Direct fit |
Vehicle fitment
The manufacturer fitment list names the 1987-1995 Jeep Wrangler (YJ), including Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims. The kit is for 4WD models.
The list does not include the TJ or LJ Wranglers, and the YJ kit is not meant for later generations. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Install time is listed at 3 to 4 hours. No bumper brackets are included, so bumper mounting must be planned separately. Support the body on stands before lifting, and never work under a body held up only by a jack.
What’s included
The kit includes high strength hardware, fiberglass reinforced nylon lift blocks, transfer case pivot brackets and radiator dropdown brackets.
Not included: Bumper brackets.









