Overview
The Daystar PA883 is a 3 inch body lift kit with a steering extension and front and rear bumper brackets. Installation may require drilling the front body bushings out to 1/2 in.
Daystar’s part code PA883 is the identifier given for this kit, and no vehicle is named in the fitment data.
Key features
- 3 in. lift height
- Steering extension included
- Front and rear bumper brackets
- Front body bushings may need drilling to 1/2 in.
Bushings and body mounts
Front body bushings are rubber parts that isolate the body from the frame, and they carry more load once the body is raised. Before drilling anything, confirm the bushing position on your truck, use a bit sized for the bolt, and clean away any burrs so the new hardware seats flat. Check thread engagement and bolt length before final tightening.
Once the bushings are set, inspect the rest of the body mounts for cracked or flattened rubber. Movement between the body and frame when the cab is rocked by hand points to worn mounts. Replace worn parts before lifting, since a lift adds stress to the same points, and re-check the torque after the first few drives.
- Use a bit sized correctly for the bolt
- Deburr holes before installing hardware
- Check thread engagement before final tightening
- Re-check torque after the first drives
Specifications
| Brand | Daystar |
|---|---|
| Part number | PA883 |
| UPC | 618089006150 |
| Lift height | 3 in. |
Vehicle fitment
Daystar lists no vehicles for the PA883 in its fitment data, so review its specifications for your truck first.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The front two body bushings may need drilling out to 1/2 in. so that the new bolts clear. Check clearance before final tightening.
What’s included
The kit includes a steering extension and front and rear bumper brackets. Check the package contents against your installation before starting.









