Overview
The Daystar PA673 is a 3 inch body lift kit from Daystar. A body lift raises the body above the frame by the kit’s lift height, so this kit adds 3 in. of body height. The kit includes a steering extension and front bumper brackets.
No vehicles are named for the PA673, so fit depends on your year, model and trim. Check those against the kit before ordering.
Key features
- 3 in. body lift height
- Steering extension included
- Front bumper brackets included
- Daystar part code PA673
Before you lift the body
A body lift sits between the frame and the body mounts, so it raises the cab and bed without changing the suspension. That gap creates tire clearance, but it also stretches the wiring, hoses and cables that run from the frame up to the body. Before installing any body lift, trace those lines and make sure none of them pull tight once the body is raised.
Because this kit includes a steering extension, the steering shaft runs at new angles and its joints work differently. Check for play, binding and a centered wheel after the first drive. Front bumper brackets carry weight differently than stock mounts, so inspect the bolts and welds after the first few trail runs and retighten them as needed.
- Route wiring and brake lines before final tightening
- Recheck steering centering after the first drive
Specifications
| Brand | Daystar |
|---|---|
| Part number | PA673 |
| UPC | 618089005931 |
| Lift height | 3 in. |
Vehicle fitment
No vehicles are named for the PA673. Check your year, model and trim against the kit before ordering, and compare the body mounts with the kit before lifting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the kit includes a steering extension, plan to check the steering linkage after the lift is installed.
What’s included
The kit includes the steering extension and front bumper brackets.









