Overview
The Daystar KT04506BK is a 1 inch body lift made of one-piece polyurethane mounts that replace the OEM body mounts without spacers. It fits 1996 to 2004 Toyota Tacoma models in the Base, Limited, Pre Runner, S-Runner and SR5 trims. The mounts keep the body aligned with the frame.
The kit is a bolt-on installation with a hardware kit included. It works as a direct alternative to factory mounts rather than an add-on spacer system.
Key features
- One-piece polyurethane body mounts
- Replace OEM mounts with no spacers
- Maintains proper frame and body alignment
- Bolt-on installation
- Hardware kit included
Before you install
A body lift raises the body off the frame without changing the suspension. Because the body sits higher, the driveline, steering linkage and wiring that run between the body and frame may need a look, especially after changes in height. Polyurethane mounts are firmer than factory rubber, so they pass more vibration into the cab. Many owners notice this on rough pavement and washboard gravel.
Before ordering, inspect the factory mounts you are replacing. Cracked, collapsed or separated rubber suggests they are due for replacement anyway, and it is a good time to check the frame mounting points. Plan to re-check the hardware after the first few trail runs, since new mounts can settle as they seat.
- Inspect brake lines and fuel lines for slack after installation
- Check exhaust clearance and the path of the driveshaft
- Re-tighten hardware after the first drives
- Keep the old mounts until the new ones are proven
Specifications
| Brand | Daystar |
|---|---|
| Part number | KT04506BK |
| UPC | 814423015523 |
| Lift height | 1 inch |
| Mount material | Polyurethane |
| Mount type | One-piece replacement |
| Installation | Bolt-on |
| Included | Hardware kit |
| Fitment type | Direct Fit |
Vehicle fitment
It fits the 1996 to 2004 Toyota Tacoma, including the Base, Limited, Pre Runner, S-Runner and SR5 trims.
Tacomas from other model years are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation is bolt-on using the included hardware kit, with no drilling or welding involved.
What’s included
One-piece polyurethane body mounts and the hardware kit for bolt-on installation.


















