Overview
The Rigid Industries 511313 is a single Dually D2 driving LED light in a compact flush mount pod with a wide spread beam. Side-aimed LEDs sit alongside the main forward-facing LEDs, widening the pattern compared with a forward-only pod. It is aimed at A-pillar, fog light and motorcycle applications.
Optics are selectable. The forward LEDs come with Spot, Flood or Driving optics, so one housing can be matched to the job. Output rises up to 102% more raw lumens depending on the optics chosen, and coverage reaches up to 120 degrees horizontal whether used in pairs or as single lights. The light is universal fit and is not built around one vehicle.
Key features
- Side-shooting LEDs add a broader beam to the forward pattern
- Up to 102% more raw lumens depending on the optics chosen
- Up to 120-degree horizontal coverage in pairs or single use
- Spot, Flood or Driving optics available for the main LEDs
- Clear lens, square light shape and LED bulb type
- Flush mounting type
Mounting and aim
Side-aimed LEDs change the pattern a light throws, so orientation matters as much as placement. Pick a spot where the pod can point forward and slightly down without blocking airflow or hitting nearby body panels. Measure the swing you need for aiming before fastening the bracket, and leave room to reach the adjustment after installation. Keep the lens clean, since dirt on the side LEDs reduces the spread.
Road use changes the picture. Lights mounted high or close to the windshield can reflect glare into the cabin, so test the beam at night in a quiet area before relying on it. Route the wiring away from heat sources and moving parts, and check the connections periodically for corrosion, especially on vehicles driven in wet or salty conditions.
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 511313 |
| UPC | 849774027147 |
| Type | Driving light |
| Bulb type | LED |
| Lens color | Clear |
| Light shape | Square |
| Mounting type | Flush |
| Size | 0 to 10 in |
| Sold as | Single |
| Fitment | Universal fit |
Vehicle fitment
Fit is universal, so confirm the mounting position against your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Side-shooting LEDs sit on one side of each fixture in pairs and on both sides in single applications, so aim and orientation change the coverage pattern. Driving lights draw real current, so run them through a fused circuit with a relay and switch. Auxiliary light rules differ by region, so review local road-use regulations before the pod is wired in.
What’s included
One D-SS PRO LED light, sold as a single unit.
Not included: Check the package contents against your installation before starting, and plan a wiring harness, switch, relay and mounting bracket as needed.









