Overview
The Rigid Industries 104122 is a 4 inch E-Series flood light bar with LED bulbs, a clear lens and a bracket mount. It is universal fit, so no specific year, make or model is tied to the bar. Mounting space and wiring access on your vehicle decide suitability.
The bar uses an updated two-piece housing with a stronger, more durable build and an improved cooling system. Extra mounting bosses on the bottom side give the housing a more reliable sealing surface.
Key features
- Two-piece housing that Rigid says is stronger and more durable
- Improved cooling system
- Housing Rigid describes as torture tested and approved
- User serviceable mounting hardware
- Mounting bosses on the bottom of the housing
- Integrated Deutsch/AMP plug
Wiring and power planning
A flood bar draws a steady load, so the power route deserves as much thought as the mounting. Running the feed through a relay keeps the factory switch circuit light and lets the bar draw current directly from the battery. Choose a fuse and wire size that suit the bar’s load, and route the cable away from heat sources, moving suspension parts and sharp edges.
The housing’s plug makes the harness connection straightforward, but the other end of the run needs planning too. Plan a switch location that is easy to reach, and add a grommet wherever wiring passes through sheet metal. Test the bar on the bench before final mounting so any wiring fault shows up before the install is complete.
- Use a relay for the power feed
- Fuse the circuit close to the battery
- Protect wiring at every metal pass-through
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 104122 |
| Type | Light bar |
| Bulb type | LED |
| Lens color | Clear |
| Mounting type | Bracket |
| Size | 4 inch |
| Housing | Two-piece |
| Fitment | Universal Fit |
| Sold as | Single |
Vehicle fitment
It is universal fit, so it is not vehicle-specific. Bracket fit, beam clearance and the wiring route on the vehicle you choose decide whether it suits the application.
Confirm the mounting location and clearance on your own vehicle before installing.
Installation notes
The integrated Deutsch/AMP plug is built into the housing. Confirm the plug matches your harness, and use a fused relay for the power feed.
What’s included
The bar is sold as a single unit with user serviceable mounting hardware.
Not included: No wiring harness, relay or switch is described, so plan to add those yourself.












