Overview
The Rigid Industries E-Series 20 Deg. Flood LED Light, part number 106113, is a 6 inch rectangular LED light bar built around a 20 degree flood beam. Flood optics spread light across a broad area rather than a narrow beam, which suits wide coverage within the E-Series range. It is sold as a single unit with a clear lens and a surface mount.
The E-Series started out in off-road use and suits power sports, marine, general automotive and first responder work. This flood model is universal fit, so no particular vehicle is matched to it. Mounting position and wiring route decide whether it works for a given setup.
Key features
- 20 degree flood beam giving a broad spread of light
- 6 inch rectangular bar with a clear lens
- LED bulb type as the light source
- Surface mounting, sold as one unit
- Flood is one of several E-Series optics, which also include Spot, Driving, Hyperspot and Diffused
- Rigid credits recent E-Series PRO LED changes with up to 111% more raw lumens
Flood beams and mounting height
A flood beam spreads light over a broad area close to the bar, which makes it useful for seeing the ground beside and just ahead of a vehicle. The spread depends on how high and at what angle the bar sits, so a higher position covers more ground but can cast less light directly underfoot. Choose the spot that gives the pattern you need before running any cable.
A surface-mounted bar relies on a flat, stable panel and a clean wire route behind it. Check the mounting surface for flex and make sure the cable will not rub on edges or moving parts. After rough use, inspect the seal and the mount, since loose hardware is the most common reason a light shifts out of its intended aim.
- Choose a flat, stable mounting surface
- Plan the wire route before drilling
- Recheck aim after rough use
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 106113 |
| UPC | 849774028885 |
| Product type | Light bar |
| Beam | 20 degree flood |
| Light shape | Rectangular |
| Bulb type | LED |
| Lens color | Clear |
| Mounting type | Surface |
| Size | 6 inch |
| Sold as | Single |
| Fitment | Universal fit |
Vehicle fitment
The flood bar is universal fit, so it is not built for or limited to any one vehicle. A 6 inch surface-mounted bar needs a flat, open area with room for the wire run behind it, so measure the spot before deciding where it goes.
Consider where the wide beam will fall once it is mounted. A flood pattern lights a broad area near the mounting point, so position matters more than the model year of your vehicle.
Installation notes
Wire the bar through a switch and a fused relay rather than directly to the battery. Confirm the mounting hardware that comes with the bar before drilling or adhering anything. Check local road-use rules for auxiliary lights.
What’s included
One E-Series 20 Deg. Flood LED light bar, sold as a single unit.
Not included: Check the package contents against your installation before starting. Power wiring, a switch and a fuse are not part of this package.









