Overview
The Curt Manufacturing 13270 is a Class III rear receiver hitch with a 2 inch by 2 inch receiver, made for the 2006-2010 Hummer H3. It has a gloss black powder coating and installs without drilling.
Curt builds its round tubular hitches as Class III hitches for towing above 4,000 pounds gross trailer weight (GTW) and below 10,000 pounds GTW. The weight class is III/IV. The hitch mounts at the rear and accepts standard 2 inch ball mounts and accessories. It does not fit with a roll pan.
Key features
- Class III rear receiver hitch
- 2 inch by 2 inch receiver
- No-drill installation
- Gloss black powder coating
- Weight class III/IV
- Does not fit with a roll pan
Towing setup and safety checks
A receiver hitch is only as strong as its mounting points and the hardware that secures it. Before towing, check the bolts, the receiver pin and the safety chain attachment. Confirm that the wiring, fuel line and exhaust have room around the hitch, since a rear hitch can rub against lines that sit low under the vehicle.
Pair the hitch with a ball mount and trailer ball rated for the load, and keep the trailer weight below the lowest rated capacity in the setup. Re-check the hardware after the first few miles of towing, and inspect the welds and receiver tube for cracks each season. Trailer lighting should be tested every time the hitch is moved to a different trailer.
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | 13270 (also CRT13270) |
| Product type | Receiver hitch |
| Hitch class | Class III |
| Weight class | Class III/IV |
| Receiver size | 2 inches x 2 inches |
| Position | Rear |
| Roll pan | Does not fit with roll pan |
| Finish | Gloss black powder coating |
| Installation | No drilling |
| Fitment type | Direct fit |
Vehicle fitment
The stored manufacturer fitment list for the Curt 13270 covers the 2006-2010 Hummer H3 (Alpha, Base, Championship Series, X).
Only the 2006-2010 Hummer H3 is listed. Other Hummer models are not included, and the hitch does not fit with a roll pan. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Torque every bolt to the value in your installation instructions, and never exceed the lowest rated towing capacity of the vehicle, hitch or accessories.
- Support the vehicle safely and check for wiring, fuel line and exhaust clearance before tightening hardware.
- Use safety chains and the correct ball, pin and lock hardware for your trailer.
- Re-check the bolts after the first miles of towing and at regular service intervals.
- Check local regulations on towing equipment and trailer lighting.
What’s included
One Class III receiver hitch.
Not included: A ball mount, hitch ball, pin and clip, and trailer light wiring are not included.









