Overview
The Curt Manufacturing CRT13201 is a Class III rear receiver hitch with a 2-inch by 2-inch receiver for the 2009–2018 Dodge Journey. It is aimed at mid-capacity towing, where trailers exceed 4,000 pounds gross trailer weight (GTW) and stay under 10,000 pounds GTW.
The hitch has a gloss black powder coat finish and mounts without drilling. It is rated in the Class III/IV weight class and does not fit with a roll pan.
Key features
- Round tubular Class III hitch for mid-capacity towing
- 2 Inches X 2 Inches receiver opening
- No-drill design described by Curt
- Trailer range above 4,000 pounds GTW and below 10,000 pounds GTW
- Gloss black powder coat finish
- Does not fit with a roll pan
Before you tow
A Class III receiver hitch is only one part of a towing setup. The trailer, ball mount and vehicle all have to work together. Before hooking up, check that the ball diameter matches the trailer coupler, that the ball mount rating is at or above the planned load, and that tongue weight stays within what your vehicle is designed to carry. Use a hitch pin and clip every time.
Road vibration can loosen hitch bolts over time, and powder coat can chip where stones strike the tube. Look the receiver over after the first few trips and re-check the mounting bolts. Surface rust showing through a chip is worth cleaning and touching up early.
- Re-check bolt tightness after the first few trips
- Inspect the receiver tube for cracks or deep chips
- Match the ball size to the trailer coupler
- Keep a pin and clip on every ball mount
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT13201 |
| Mounting position | Rear |
| Fit type | Direct fit |
| Receiver size | 2 inches x 2 inches |
| Hitch class | Class III |
| Weight class | Class III/IV |
| Trailer weight range (GTW) | More than 4,000 pounds and less than 10,000 pounds |
| Finish | Gloss black powder coat |
| Roll pan compatibility | Does not fit with roll pan |
| Installation | No drilling is required for installation. |
Vehicle fitment
It fits the 2009–2018 Dodge Journey in AVP, Base, Crew, Crossroad, Express, GT, Limited, Lux, Mainstreet, R/T, SE and SXT trims.
The list covers Journey model years 2009–2018 only, so years outside that range are not covered, and other Dodge models are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The hitch mounts without drilling. Check for a roll pan before installing, because this hitch does not fit with one. Keep trailer loads inside the Class III range and confirm the Journey’s towing rating before connecting a trailer.
What’s included
Check the package contents against your installation before starting.
Not included: Confirm which mounting parts you need for your installation before ordering.









