Overview
The Crown Automotive 1AT17080B is a 1st and 2nd gear synchronizer assembly for T176 and T177 manual transmissions. A synchronizer assembly is the set of parts that helps the gear engage smoothly when the driver shifts into 1st or 2nd.
It fits 1980–1986 Jeep CJ5 and CJ7 models, the 1981–1985 Jeep Scrambler and the 1981–1983 Jeep Wagoneer (SJ).
Key features
- Covers the 1st and 2nd gear synchronizer position
- Built for T176 and T177 manual transmissions
- It covers four Jeep and Scrambler model groups.
- Part number 1AT17080B with UPC 700007150931
Planning a T176 or T177 rebuild
A first and second gear synchronizer assembly does most of the work when the driver moves into the lower gears, so wear here is easy to feel. Early symptoms include a notchy shift into 1st or 2nd, a clash on the way in, or a gear that slips out when the vehicle is under throttle.
Because T176 and T177 gearboxes are built differently, match the unit to the exact transmission before committing to the job. Ordering a gasket set and checking the shift forks at the same time keeps the rebuild moving. A transmission rebuilder with experience on these gearboxes can measure the clearances that a parts list cannot show.
- Confirm the transmission model stamped on the case
- Inspect the shift forks and sleeves for wear
- Check gear teeth for chipping before reassembly
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 1AT17080B |
| UPC | 700007150931 |
| Transmission | T176 and T177 manual |
| Position | 1st and 2nd gear |
| Assembly type | Synchronizer assembly |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1980–1983 Jeep CJ5 in Base, Golden Eagle, Laredo, Limited and Renegade trims; the 1980–1986 Jeep CJ7 in Base, Golden Hawk, Laredo, Limited and Renegade trims; the 1981–1985 Jeep Scrambler; and the 1981–1983 Jeep Wagoneer (SJ) in Base, Brougham and Limited trims.
Cherokee, Wrangler and later Jeep models are outside the coverage above. Check year, model and trim against your vehicle before ordering.
Installation notes
Synchronizer assemblies sit inside the gearbox, so replacement means transmission disassembly. A technician experienced with T176 and T177 units is the safer choice for this job.
What’s included
One 1st and 2nd gear synchronizer assembly, part number 1AT17080B.









