Select your vehicle

Crown Automotive Piston and Pin – J8134441

Crown Automotive

$95.45In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 5:00 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Piston and pin, standard size
  • Fits a 4.2L six-cylinder engine
  • Fits 1979–1990 Jeep CJ, Cherokee SJ, Wagoneer SJ and Wrangler YJ models
  • Part number J8134441

Description

Overview

The Crown Automotive J8134441 is a standard-size piston and pin for 4.2L six-cylinder Jeep engines. Crown Automotive has supplied replacement parts for Jeep vehicles for more than 50 years and offers over 8,000 part numbers, including factory-discontinued items.

It fits Jeep CJ, Cherokee SJ, Wagoneer SJ, Grand Wagoneer, Scrambler, J10 and Wrangler YJ models from 1979 to 1990.

Key features

  • Piston and pin assembly
  • Standard size
  • For a 4.2L six-cylinder engine

Rebuilding with a new piston

A new piston is usually fitted as part of a bottom-end or top-end rebuild. The cylinder bore should be measured for wear and taper before the piston is chosen, since the fit clearance decides whether the piston will seal and run correctly. Pin fit and rod alignment also need checking, because a misaligned rod shortens piston life quickly.

Rings, bearings and gaskets are normally replaced at the same time. Matching the piston to the bore and the ring set avoids oil consumption and loss of compression. Break in the rebuilt engine gently and change the oil after the first few hundred miles.

  • Measure the cylinder bore for wear and taper
  • Check the pin fit and rod alignment
  • Replace rings and bearings during the rebuild
  • Change the oil soon after the break-in period

Specifications

Brand Crown Automotive
Part number J8134441
UPC 848399072358
Product type Piston and pin
Size Standard
Engine 4.2L six-cylinder

Vehicle fitment

1979–1983 Jeep Cherokee (SJ); 1979–1983 Jeep CJ5; 1979–1986 Jeep CJ7; 1979–1983 Jeep DJ5; 1984–1986 Jeep Grand Wagoneer (SJ); 1979–1987 Jeep J10; 1981–1985 Jeep Scrambler; 1980–1983 Jeep Wagoneer (SJ); and 1987–1990 Jeep Wrangler (YJ), in each model’s listed trims.

Other model years are not covered, including later Cherokee XJ and Wrangler TJ models. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Piston replacement requires engine disassembly and fitting to the cylinder bore, so have the work done by a qualified engine shop.

What’s included

The package is a piston and pin. Check the package contents against your rebuild before starting.

SKU: CROJ8134441 Category:

Specification

Shipping weight 3.00 lbs
Package dimensions 15.00 × 9.00 × 5.00 in
brands

Fitment

VehicleYearsTrims
Jeep Cherokee (SJ)1979–1983Base, Chief, Pioneer, Wide Track
Jeep CJ51979–1983Base, Golden Eagle, Laredo, Limited, Renegade
Jeep CJ71979–1986Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade
Jeep DJ51979–1983Base
Jeep Grand Wagoneer (SJ)1984–1986Base, Limited
Jeep J101979–1987Base
Jeep Scrambler1981–1985Base, Laredo, Renegade, SL, SR
Jeep Wagoneer (SJ)1980–1983Base, Brougham, Limited
Jeep Wrangler (YJ)1987–1990Base, Islander, Laredo, S, Sahara, Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Is the Crown Automotive J8134441 a piston and pin?

Yes. It is a piston and pin, part number J8134441, from Crown Automotive. The size is standard, and it is for a 4.2L six-cylinder engine.

Which Jeep models fit the J8134441 piston?

It fits 1979–1983 Cherokee SJ, CJ5 and DJ5, 1979–1986 CJ7, 1979–1987 J10, 1981–1985 Scrambler, 1980–1983 Wagoneer SJ, 1984–1986 Grand Wagoneer SJ and 1987–1990 Wrangler YJ.

Are piston rings included with this piston and pin?

No. The package is a piston and pin only. Check the package contents against your rebuild and confirm ring fit before installing.

Should rings be replaced when a new piston is fitted?

Yes, in most rebuilds the rings are replaced with the piston. Old rings have worn to the cylinder shape, so a new piston with old rings will not seal properly. Confirm ring fit for the bore size before installing.

How is piston fit checked before installation?

A qualified engine shop measures the bore and the piston clearance, then checks the pin fit and rod alignment. Those checks confirm the piston will seal and move freely once the engine is assembled.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon