Overview
The Crown Automotive J8126920 is a water temperature gauge for a speedometer cluster. It must be replaced as a pair with the matching fuel gauge.
It is an electric, standard-size gauge with a black face and is an O.E. replacement part.
Key features
- Water temperature reading for the speedometer cluster
- Must be replaced as a pair with the fuel gauge
- Electric standard size gauge
- Black face color
Replacing a cluster temperature gauge
A speedometer cluster temperature gauge is driven by a sending unit at the engine, and the reading is only as good as the wiring between them. Before removing the cluster, check the sender, the ground connection and the connector pins for corrosion or looseness. A gauge that reads high, low or not at all can come from any of these points, not just the gauge itself.
Because this gauge is replaced as a pair with the fuel gauge, the job is best planned as one repair. Both gauges share the cluster, so removing the cluster once gives access to each. Set aside time to test the cluster lamps and needles after reassembly, and confirm both needles return to their rest positions before driving.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J8126920 |
| UPC | 848399068917 |
| Gauge type | Water temperature |
| Mounting | Speedometer cluster |
| Gauge series | Other |
| Electric or mechanical | Electric |
| Mounting size | Standard |
| Face color | Black |
| Replacement requirement | Replace as a pair with the fuel gauge |
Vehicle fitment
Fit by year, model and trim should be confirmed before ordering, since no specific vehicles are identified for this gauge.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the gauge must be replaced as a pair, plan to replace the fuel gauge in the same job.
What’s included
Includes the temperature gauge.
Not included: the fuel gauge, which must be replaced as a pair with this gauge.












