Overview
The Crown Automotive spare tire bracket, part number J5461361, is built for a 5 on 5.5 bolt pattern and holds a spare up to 31 inches. It fits the 1976–1983 Jeep CJ5, the 1976–1986 CJ7 and the 1981–1985 Jeep Scrambler.
The bracket mounts to the body as a direct fit. Inspect its material and finish on arrival and confirm its condition before fitting.
Key features
- 5 on 5.5 bolt pattern
- Holds up to a 31 inch spare
- Body mount location
- Direct fit as listed by Crown Automotive
Body-mount spare basics
A body-mounted spare bracket carries the spare at the rear or side of the vehicle, so it sees vibration and weather all year. Bolt pattern matters most: a spare wheel that does not match the bracket will not sit square or hold safely. Before fitting, compare the spare’s bolt pattern and diameter with the bracket and make sure the tire clears the body and any tailgate hinge.
Older body-mount brackets often show rust where they meet the body panel, so clean the contact area and check for cracks around the bolt holes. Tighten the mounting fasteners after the first few drives and again after rough trail use. Keep a lock or pin in place if the spare sits in an exposed position, and replace worn retaining hardware before the spare is carried again.
- Match the spare’s bolt pattern to the bracket
- Check tire clearance at the body and hinge
- Inspect body mount holes for rust or cracks
- Retighten fasteners after rough trail use
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J5461361 |
| UPC | 848399065817 |
| Bolt pattern | 5 on 5.5 |
| Maximum spare | 31 inches |
| Mounting location | Body mount |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1976–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade), the 1976–1986 CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade) and the 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR).
Wrangler YJ and TJ models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bracket is built for a 5 on 5.5 bolt pattern, so confirm the spare wheel matches before mounting it. Check the spare’s diameter against the 31-inch limit as well.
What’s included
Check the hardware and fasteners on arrival against your installation before starting.
Not included: The spare tire and wheel.
