Overview
The Mean Green MG1382 is a 220-amp high-output alternator for Jeep engines from 1999 to 2002, part number MGIMG1382. It fits 1999 Wrangler TJ models with the 2.5L four-cylinder engine from 1999 to 2002 and 1999 TJ models with the 4.0L six-cylinder. It also fits 1999–2001 Cherokee XJ models.
The alternator suits dual battery setups, where it helps keep voltage levels up. An internal voltage regulator is designed to protect the wiring and ignition system. It carries an unconditional one year warranty and is made in the USA.
Key features
- 220 amperes of output for dual battery setups
- Voltage regulator inside the unit, designed to protect wiring and ignition
- Direct plug-in wiring
- Natural finish
- Made in the USA
- One year unconditional warranty
Charging system load
A high-output alternator raises the amount of current available to the battery and electrical loads, which helps when accessories such as lights, a winch or a second battery draw power at idle. Its output only reaches the battery as well as the charging wires and cable connections allow, so the existing wiring should be in good condition before relying on the upgrade.
Drive belt condition matters as well. A higher-output unit places more load on the belt and pulley, so check tension and wear, and look for glazing or cracks. Keep an eye on the battery voltage at idle after installation, since the charging system is only as strong as its weakest connection.
- Check belt tension and wear
- Clean and tighten battery cable connections
- Watch for dimming lights at idle
Specifications
| Brand | Mean Green |
|---|---|
| Part number | MGIMG1382 |
| Output | 220 amperes |
| Wiring | Direct plug in |
| Finish | Natural |
| Warranty | One year, unconditional |
| Origin | Made in the USA |
| Fitment | Direct fit |
Vehicle fitment
It fits 1999–2001 Jeep Cherokee (XJ) in Classic, Limited, SE and Sport trims, and 1999–2002 Jeep Wrangler (TJ) in SE, Sahara, Sport and X trims.
The list stops at 2001 for the Cherokee XJ and at 2002 for the Wrangler TJ. Wrangler YJ and Wrangler JK models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is a replacement that plugs into the existing harness with direct plug-in wiring. Dual battery setups benefit from its output. Disconnect the negative battery cable before you unbolt the old alternator.
What’s included
Compare the brackets, pulleys and mounting hardware you already have with your installation before starting.









