Overview
The Crown Automotive main bearing set, part number 8133252K6, is a set of 6 main bearings with an offset tab. Main bearings support the crankshaft in the engine block. It fits Jeep models from 1972 to 1990, including CJ, SJ, XJ, J-series and Wrangler YJ vehicles.
Key features
- Set of 6 main bearings
- Offset tab design
- Crown Automotive part number 8133252K6
- Fits 1972 to 1990 Jeep models
Before a bearing job
Main bearings carry the crankshaft load in the block, so their condition shows up as knocking, low oil pressure, or a noise that rises with engine speed. Before fitting a new set, inspect the crankshaft journals for scoring, check that the oil passages are clear, and clean the bearing housings thoroughly. Any debris left behind can damage a new bearing quickly.
Clearance is the main measurement for a bearing job, and an engine builder usually measures it with a gauge before assembly. Use fresh assembly lube on the bearing faces, keep each bearing with its original cap, and torque the cap bolts in the sequence the procedure gives. Because bearings are engine-internal, the work is best handled by someone with experience in engine rebuilds.
- Check journals for scoring and taper
- Confirm oil passages are clear
- Keep each bearing with its original cap
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 8133252K6 |
| UPC | 848399049152 |
| Quantity | Set of 6 |
| Feature | Offset tab |
Vehicle fitment
It fits 1974–1983 Cherokee (SJ); 1987–1990 Cherokee (XJ); 1972–1983 CJ5; 1972–1975 CJ6; 1976–1986 CJ7; 1987–1990 Comanche; 1972–1973 Commando; 1973–1983 DJ5; 1984–1986 Grand Wagoneer (SJ); 1972–1973 J-100, J-2500, J-2600, J-4500, J-4600, J-4700 and J-4800; 1974–1987 J10; 1974 and 1976 J20; 1981–1985 Scrambler; 1972–1973, 1980–1983 and 1987–1990 Wagoneer (SJ); and 1987–1990 Wrangler (YJ).
Wrangler TJ and LJ models and Cherokee years from 1991 onward are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Main bearings are engine-internal parts, so a qualified engine builder should handle the fitting and clearance checks.
What’s included
The set contains 6 bearings with an offset tab.









