Overview
It is a 164-tooth ring gear for AMC 4.0L and 4.2L 6-cylinder engines with manual transmission. It fits Jeep Cherokee, CJ, Wagoneer and Wrangler models from 1972 to 1993.
The starter ring gear is the toothed ring on the flywheel that the starter motor engages to crank the engine. A worn ring gear can make the starter grind or fail to turn the engine, so the replacement is sized to the tooth count and engine listed.
Key features
- Flywheel starter ring gear
- 164-tooth count
- For AMC 4.0L and 4.2L 6-cylinder engines
- For manual-transmission applications
- Listed across Jeep Cherokee, CJ, Comanche, Wagoneer, J-series and Wrangler models
Starter ring gear wear
The ring gear is the toothed ring on the flywheel that the starter pinion meshes with to turn the engine. Teeth wear from repeated engagement, and damaged teeth can cause the starter to slip, grind or fail to crank. A ring gear with missing or chipped teeth often shows up as a rough start that gets worse over time.
Replacing a ring gear usually means removing the flywheel and heating the old gear off, then fitting the new one with the teeth facing the correct direction. The flywheel should be checked for cracks and warping at the same time, since a damaged flywheel can wear a new ring gear quickly.
- Grinding noise when the starter engages
- Starter that slips or fails to turn the engine
- Chipped or missing teeth on the ring
- Cracks on the flywheel face near the ring
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J3179741 |
| UPC | 848399058390 |
| Product type | Flywheel starter ring gear |
| Tooth count | 164 |
| Engine | AMC 4.0L and 4.2L 6-cylinder |
| Transmission | Manual |
Vehicle fitment
It fits the 1974–1983 and 1987–1993 Jeep Cherokee (SJ and XJ), the 1972–1983 CJ5, the 1972–1975 CJ6 and the 1976–1986 CJ7. It also fits the 1972 Commando, the 1987–1992 Comanche, the 1973–1983 DJ5, the 1993 Grand Cherokee (ZJ), the 1984–1986 Grand Wagoneer, the 1981–1985 Scrambler, the 1987–1993 Wrangler (YJ), and Wagoneer and J-series trucks from 1972 to 1987.
The list does not include the Wrangler TJ, the Grand Cherokee WJ, or any model years outside the ranges above. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A ring gear is usually replaced with the flywheel off the engine, which normally means the job is done in a machine shop or by an experienced mechanic. Check the flywheel for cracks and wear before fitting a new ring gear.
What’s included
Check the package contents against your installation before starting, including whether the flywheel and fitting hardware are needed.









