Overview
The Crown Automotive 33003515 is a standard intake valve for 2.5L 4 cylinder or 4.0L 6 cylinder engines. It is a direct-fit valve for Jeep models from 1987 through 1998, including Cherokee XJ, Comanche, Wagoneer SJ, Wrangler YJ and TJ, and Grand Cherokee ZJ.
The head is marked 15 inch and 1 groove. Compare the valve with your original part before installation to confirm diameter, length and material.
Key features
- Standard intake valve type
- For 2.5L 4 cylinder or 4.0L 6 cylinder engines
- Marked 15 inch and 1 groove on the head
- Direct-fit design per the manufacturer list
Intake valve replacement tips
An intake valve controls airflow into the cylinder during the intake stroke, so its seat and face condition affect how well the engine runs. Replacing a valve usually involves removing the cylinder head, which makes it a job for an experienced mechanic or machine shop. Valve seats, guides and springs are often inspected at the same time.
When a valve is out, check the seat for pitting and the guide for side play. Clean carbon from the valve face and seat before fitting, and confirm the marked head matches your original part. Keeping the old valve for comparison can help confirm length and diameter before the new one goes in.
- Inspect seats for pitting
- Check guides for side play
- Clean carbon from valve faces
- Compare the new valve with the old one before fitting
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 33003515 |
| Valve type | Standard |
| Engine | 2.5L 4 cylinder, 4.0L 6 cylinder |
| Head marking | 15 inch and 1 groove |
| Fitment type | Direct fit |
Vehicle fitment
It fits 1987–1998 Jeep Cherokee (XJ); 1987–1992 Jeep Comanche; 1993–1998 Jeep Grand Cherokee (ZJ); 1987–1990 Jeep Wagoneer (SJ); 1997–1998 Jeep Wrangler (TJ); and 1987–1995 Jeep Wrangler (YJ). Trims vary by model.
Years outside these ranges, including Wrangler TJ models from 1999 on, are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing an intake valve usually requires removing the cylinder head, so the job is typically handled by an experienced mechanic or machine shop.
What’s included
The package contains the intake valve only. Check the rest of the valvetrain parts against your installation before starting.









