Overview
The Crown Automotive 53004051 is a firewall grommet for the hydraulic clutch hose. It fits the 1987 to 1991 Jeep Cherokee (XJ), the 1987 to 1991 Jeep Comanche and the 1987 to 1992 Jeep Wrangler (YJ). It is the firewall piece where the hose passes through.
It is a direct fit. Compare the old grommet’s size and shape with this one before installing, since the hose diameter it is sized for should match your hose.
Key features
- Firewall grommet for the hydraulic clutch hose
- Direct fit for the listed 1987 to 1992 Jeep models
Firewall grommet replacement tips
A firewall grommet seals the hole where the clutch hydraulic hose passes from the engine bay into the cab. Its job is to keep water, noise and exhaust fumes out of the cabin while keeping the hose from chafing against sheet metal. Over time the rubber hardens or cracks, and a grommet that has slipped out of its hole can let water pour onto the floor, so it is worth checking during any clutch or hose work.
When replacing the grommet, clean the firewall hole and remove any old sealant or rust first. Check the hydraulic hose for chafing, cracks or wet spots, since the hose is often replaced when the grommet is worn. Seat the new grommet fully and route the hose so it does not rub against the firewall or steering shaft.
- Clean the firewall hole before fitting
- Inspect the hose for chafing or wet spots
- Check that the grommet seats fully in the opening
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 53004051 |
| UPC | 848399017274 |
| Product type | Firewall grommet |
| Use | Hydraulic clutch hose |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1987 to 1991 Jeep Cherokee (XJ), the 1987 to 1991 Jeep Comanche and the 1987 to 1992 Jeep Wrangler (YJ).
Close vehicles that are not on the list include the Cherokee XJ from 1984 to 1986 and 1992 to 2001, which are outside the stated years. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One firewall grommet.









