Overview
The Crown Automotive J5358568 is a front hub and rotor kit for the 1978–1981 Jeep CJ5 and CJ7 and the 1981 Jeep Scrambler.
Crown Automotive describes itself as a manufacturer and distributor of Jeep replacement parts for more than 50 years, with over 8,000 part numbers that include factory-discontinued items. The J5358568 is a direct-fit front replacement.
Key features
- Hub and rotor kit for the front position
- Direct-fit replacement
- Bearings and studs are separate parts
Rotor and pad check
A hub and rotor kit is a good moment to look at the pads, caliper and brake hoses as well. Rotors wear through use and can develop a lip at the edge or uneven thickness, which causes pedal pulsing. Measure the rotor face against the minimum thickness marked on it, and replace the rotor if it is at or below that limit.
Bedding in new pads helps them transfer an even layer to the rotor, and the hub mating surface should be clean and flat before fitting. A dirty or warped surface makes a rotor pulse even when the rotor itself is new. Keep the brake fluid fresh, because moisture in old fluid lowers braking performance under heavy use.
- Check rotor thickness against the minimum mark
- Clean the hub mating surface before fitting
- Bed in new pads gradually
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J5358568 |
| UPC | 848399064094 |
| Item type | Hub and rotor kit |
| Position | Front |
| Fit | Direct fit |
Vehicle fitment
The J5358568 fits the 1978–1981 Jeep CJ5 and CJ7, including the Golden Eagle, Laredo and Renegade versions, and the 1981 Jeep Scrambler.
Years before 1978 for the CJ5 and CJ7, and the Scout II, are not covered. Verify your year, model and trim match before you order.
What’s included
- Front hub and rotor kit
Not included: bearings and studs.
