Overview
The Crown Automotive headlamp adjusting screw, part number 56006405, is a vertical-style adjuster for a headlamp on the driver or passenger side. It fits the 1993–1996 Jeep Grand Cherokee (ZJ).
Its orientation is recorded in the specifications below, along with the nut listed with the screw.
Key features
- Vertical adjuster style
- Driver or passenger side application
- Listed with a nut
- It fits the 1993–1996 Jeep Grand Cherokee (ZJ).
Vertical aim and bracket wear
Vertical adjusters raise or lower a headlamp so the low beam lands at the right height on the road ahead. The screw pushes or pulls the housing against its bracket, so the pivot and the bracket face take the same stress each time the lamp is moved. Worn bracket faces and loose fasteners often show up as a lamp that slowly sags out of aim.
A bulb change or lens swap is a good time to inspect the vertical adjuster before reassembly. Look for flat spots on the threads, cracked plastic and any play in the mounting point. After reinstalling, aim the beam on a level surface, because a small error in height can change how far the light reaches down the road.
- Flat spots or stripped threads on the screw
- Play in the mount when the lamp is pushed by hand
- Sagging beam after a few weeks of driving
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 56006405 |
| UPC | 848399022100 |
| Adjuster style | Vertical |
| Side | Driver or passenger |
| Hardware | Nut listed with screw |
Vehicle fitment
Listed trims for the 1993–1996 Jeep Grand Cherokee (ZJ) include Base, Laredo, Limited, Orvis and SE.
No other Jeep models or Grand Cherokee years are in this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
A nut is noted with the screw; no other contents are given.








