Overview
The Crown Automotive headlamp adjusting screw, part number 56006403, is a pivot-style adjuster for a headlamp on the driver or passenger side. It fits the 1993–1996 Jeep Grand Cherokee (ZJ).
The screw is listed with a nut and is intended for headlamp aim adjustment on the listed vehicle.
Key features
- Pivot-style adjuster
- Driver or passenger side application
- Listed with a nut
- It fits the 1993–1996 Jeep Grand Cherokee (ZJ).
Setting headlamp aim
A headlamp adjusting screw acts as the pivot point between the lamp housing and its mounting bracket. Turning it changes the angle of the lamp so the beam can be aimed level with the road. Because the adjuster carries the weight of the housing and takes constant vibration, its threads and mounting point wear over time, and a worn adjuster is one of the most common reasons a headlamp will not hold its setting.
Aim is usually set after a new adjuster goes in, and again after a lens or bulb change. Work on level ground with a normal load in the cab, and check the beam against a wall at a set distance. Look at the nut seating and the plastic around the mounting point for cracks before tightening, since over-torquing is a frequent cause of damage on these lamps.
- Stripped threads or a loose screw that will not hold aim
- Cracked plastic around the mounting point
- Lamps that drift after a few weeks of driving
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 56006403 |
| UPC | 848399022087 |
| Adjuster style | Pivot |
| Side | Driver or passenger |
| Hardware | Nut listed with screw |
Vehicle fitment
The manufacturer fitment list includes the 1993–1996 Jeep Grand Cherokee (ZJ) in Base, Laredo, Limited, Orvis and SE trims.
Other Grand Cherokee generations and Jeep models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
A nut is listed with the screw. No other package contents are stated.








