Overview
The Crown Automotive headlamp adjusting screw, part number 56006404, is a horizontal-style adjuster for a headlamp on the driver or passenger side. Its listed vehicle is the 1993–1996 Jeep Grand Cherokee (ZJ).
The screw is listed with a nut, which is noted in the specifications below.
Key features
- Horizontal adjuster style
- Driver or passenger side application
- Listed with a nut
- It fits the 1993–1996 Jeep Grand Cherokee (ZJ).
Horizontal aim adjustment
Horizontal adjusters move a headlamp side to side, which makes them the main tool for correcting a lamp that points too far left or right. They work by rotating the screw against the bracket, so the threads and the pivot face both take load every time the aim is changed. Smooth movement is the first thing to check when a headlight will not stay aligned.
Adjusters are usually replaced in pairs when one side has failed, because the other side has been under the same load for the same years. Before final aim, confirm the screw turns smoothly through its full range and that the nut seats square. Snug the nut carefully, since a cracked housing boss is harder to fix than a worn adjuster.
- Check that the screw turns freely through its range
- Seat the nut square before final tightening
- Re-aim after any bracket or headlamp replacement
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 56006404 |
| UPC | 848399022094 |
| Adjuster style | Horizontal |
| Side | Driver or passenger |
| Hardware | Nut listed with screw |
Vehicle fitment
Manufacturer fitment data covers the 1993–1996 Jeep Grand Cherokee (ZJ), with Base, Laredo, Limited, Orvis and SE trims.
Grand Cherokee years outside 1993–1996 and other Jeep models are not included. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The nut listed with the screw is the only extra item named.








