Overview
The Crown Automotive 4792815AB is a harmonic balancer for the 5.7L engine. It fits the 2005 Jeep Grand Cherokee (WJ), the 2006–2008 Jeep Commander (XK) and the 2006–2008 Jeep Grand Cherokee (WK), each with the trims shown below.
A harmonic balancer sits at the front of the crankshaft and damps torsional vibration in the crankshaft as the engine runs.
Key features
- Built for the 5.7L engine
- Damps crankshaft torsional vibration as a harmonic balancer
- Part number 4792815AB with UPC 848399086713
- Fits Limited and Overland trims on the Commander and Grand Cherokee
Checking balancer fit
A harmonic balancer for the 5.7L engine has to match the crankshaft’s front end exactly, so the bore and keyway deserve attention before installation. Compare the new unit with the old one, and look for burrs or rust on the crank nose that could prevent it seating square.
The balancer’s rubber ring absorbs energy as the engine runs, so age and heat wear it over time. Inspect the ring for cracks, separation or a shiny, glazed look. A worn ring can allow the outer ring to drift, which shifts timing and throws the accessory belt out of line.
Plan for belt removal and pulley work before the old balancer comes off, and confirm your year, model and trim before buying. Keep the bolts clean and use new ones if the service steps call for them.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 4792815AB |
| UPC | 848399086713 |
| Engine | 5.7L |
| Part type | Harmonic balancer |
Vehicle fitment
It fits the 2005 Jeep Grand Cherokee (WJ) Limited, the 2006–2008 Jeep Commander (XK) Limited and Overland, and the 2006–2008 Jeep Grand Cherokee (WK) Limited and Overland.
Grand Cherokee WJ years other than 2005, Commander years outside 2006–2008, and base trims are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Expect to remove the drive belt and crankshaft pulley before the balancer comes off. Check the balancer’s bore fit against the crankshaft before installing it.
What’s included
Plan for belt and pulley removal, and gather any bolts or fasteners you need before starting.









